6
E
Connecting
A
Turn the computer off.
Expansion Bus
Connector
A
Do not connect the Magnetic
Stripe Card Reader in
sleep (
Windows Vista
) /
standby (
Windows XP
) or
hibernation mode.
B
Connect the Magnetic Stripe
Card Reader to the connector
of the computer with
Panasonic logo facing
upwards.
(For information about the position of the Expansion Bus
Connector, refer to the computer’s Operating Instructions.)
C
Tighten screws (A) until the waterproof sheet goes out of sight.
D
Waterproof sheet
When using the computer in unstable
places such as a car, or when using the
computer with the Magnetic Stripe Card
Reader attached continuously, attach the
rubber caps to prevent the screws from
loosening.
Tuck the rubber caps in until there is no
gap between the screw base and rubber.
Disconnecting
A
Turn the computer off.
A
Do not disconnect the Magnetic Stripe
Card Reader in sleep (
Windows Vista
) /
standby (
Windows XP
) or hibernation
mode.
B
Remove the rubber caps.
C
Loosen screws (A).
D
Pull the Magnetic Stripe Card Reader
out straight.
■
■
Connecting / Disconnecting
DFQW5267ZA_VCRU11U_OI_MGFJ.indd 6
2009/03/24 10:48:05
