background image

24

G

et

tin

St

ar

te

d

Turning On

Slide and hold the power switch (

è

 page 16) until the power status indicator (

è

 page 16) lights.

  NOTE 

l

  Do not slide the power switch repeatedly.

l

  The computer will forcibly be turned off if you slide and hold the power switch for four seconds 

or longer.

l

  Once you turn off the computer, wait for ten seconds or more before you turn on the computer 

again.

l

  Do not perform the following operation until the hard disk drive indicator   turns off.

 Connecting or disconnecting the AC adaptor

 Sliding the power switch

 Touching the keyboard, touch pad, tablet buttons or external mouse

 Closing the display

 Turn on/off the wireless switch

Turning Off

A

  Shut down the computer.

 
  1. Display “Charm”, and click  .

  2. Click [Power] - [Shut down].
 
  Click   (Start) - [Shutdown].

B

  When the computer is in the laptop mode, close the display after the power indicator goes off 

completely.

  NOTE 

l

 

„

To turn off the computer completely, proceed as follows.

A

  Display “Charm”, and click   - [Change PC settings] - [Update and recovery] - [Recovery].

B

  Click [Restart now] under “Advanced startup”.

C

  Click [Turn off your PC].

When Starting Up/Shutting Down

Do not do the following

 Connecting or disconnecting the AC adaptor

 Sliding the power switch

 Touching the keyboard, or external mouse

 Closing the display

 Turn on/off the wireless switch

  NOTE 

l

  To conserve power, the following power saving methods are set at the time of purchase.

 The screen automatically turns off after :

  10 minutes (when AC adaptor is connected) of inactivity

  5 minutes (when operating on battery power) of inactivity

 The computer automatically enters sleep

*1

 after :

  20 minutes (when AC adaptor is connected) of inactivity

  15 minutes (when operating on battery power) of inactivity

*1

  Refer to 

 

Reference Manual

 “Sleep or Hibernation Functions” about resuming from sleep.

Turning On / Turning Off

CF-AX3mk2_EU_M.indb   24

2013/11/18   12:12:54

Содержание CF-AX3 Series

























































Отзывы: