29
Dealing with Problems
When a problem occurs, please refer to this page. If you think it has to do with the software application you are using, please
read the related manual. If for some reason you still cannot figure out the problem, please consult your nearest Panasonic dealer.
Starting Up
The power indicator (
) or
battery indicator ( ) is not
lit
is displayed
is not displayed
(Once this icon is executed, it will
not be displayed later)
is not displayed
[Post Start Up Error(s)] is
displayed
The pre-memory count,
Windows startup, or an
operation is extremely
slow
The date and time are
incorrect
Check the cable connection for the AC adapter (
page 7).
Check to see if a fully charged battery is properly installed (
page 16).
Pressing the reset button will solve the problem (
page 39).
Please input your password. If you have forgotten it, consult your nearest Panasonic dealer.
If before you double-click
it disappears, select [Start]-[Run], input
[c:\util\avapp\psetup.bat], and press
. Follow the message on the screen.
Select [Start]-[Run], input [c:\util\avapp\manual\seticon.bat], and press
.
page 28
Run [Load Default Settings (PnP)] in the Setup Utility. This will restore the Setup Utility's
settings to their default values (except the password settings), then the Setup Utility must be run
once again for you to input the appropriate operating environment settings. (The processing
speed depends on the application software used, so this operation may not cause the processing
speed to increase.)
You can set the date and time through [Date/Time] in [Start] - [Settings] - [Control Panel].
Another way is with the DATE and TIME commands in MS-DOS.
If you continue to experience problems, the internal battery maintaining the clock may
need to be replaced. Please consult your nearest Panasonic dealer.
The red battery indicator
lights or the beeps sound
while the computer is in use.
The red indicator blinks
The red indicator lights for
an extended period of time
After the AC adapter is
connected, the orange indi-
cator blinks five times
The battery level is low. Connect the AC adapter or replace the battery pack with a fully
charged one. If you have neither the adapter nor an extra battery, save your data and
power off your computer.
The temperature has risen due to a big load. Attach the AC adapter to take the load off the
pack.
The battery pack or recharging function may be defective. Quickly remove the battery
pack and disconnect the AC adapter, then connect them again.
If the problem persists, consult your nearest Panasonic dealer.
When the battery pack is fully charged, turn on your computer, unplug the AC adapter, and
then completely discharge the battery.
Unable to charge because of an improper temperature range (
page 15).
Battery Indicator
