16
When the charge provided by your battery pack is supplied for only a short period of time, even
after fully charging according to the instructions, it may be time to replace your battery pack.
The battery pack is a consumable item and therefore will require replacement (CF-VZS351).
Replacing the Battery Pack
Hook
NOTE
Besides the AC adapter (CF-AA1526) an optional battery
charger (CF-VCB251A) is available. This device is convenient
in that it allows you to charge another battery pack while you
are using the computer.
2
Remove the battery pack cover
Open your display. After pressing the hook on the bottom of the computer, slide to
remove the cover.
Power off your computer
(
page 10)
Do not shut down using the suspend mode.
3
Taking out the battery pack
Pull the tape on the battery pack and remove it from the computer.
1
Inserting a battery pack
Push the pack in until it is in place.
4
Reattach the battery pack cover
Slide the cover in until it snaps into place.
CAUTION
In the suspend mode, do not remove/change the battery pack. Removing the pack
in the suspend mode will erase your data and may damage the computer.
Tape
CAUTION
The charging terminal of the battery pack is used for charging
using the battery charger (CF-VCB251A), which is sold separately.
Never connect anything to the charging terminal other than the
exclusive adapter that is supplied with the battery charger.
Doing so could damage the device connected to the battery pack, the cable, and the
battery pack itself, as well as resulting in overheating or bursting.
CAUTION
Make sure to properly remove and reattach the cover. Using
excessive force (e.g., trying to snap it back into place) may
cause the cover to break.
An improperly attached cover may allow your battery pack
to fall out while you are carrying your computer.
Using the Battery Pack
Charging Terminal