Panasonic BMET200 - IRIS RECOGNITION, Руководство по эксплуатации

Страница: 60 / 86

60
●
Set the Time and Date
The following is how to set the time and date.
●
Set the Audio Mode
The following is how to set the Audio Mode.
Mute: There is no audio output.
Simple: An audio output of "Identification completed" or "Sorry you were not identified" is generated based on the result of
recognition.
Full: There are a voice guidance giving instructions such as "Please move a little closer" etc. as well as recognition results.
No. Procedure
Press [+] [0] [5] [enter].
The short electronic sound "PiPi" is heard.
Enter the time and date.
Example:
When setting 2006 January 1, 23:59,
Press [2] [0] [0] [6] [0] [1] [0] [1] [2] [3] [5] [9] [enter].
The voice guidance will say, "Registration has been completed."
Note: When the voice guidance says, "Registration has been failed.", retry Step 2.
1
2
accept reject
accept reject
accept reject
No. Procedure
Press [+] [0] [4] [enter].
The short electronic sound "PiPi" is heard.
Enter one of the following.
Mute:
Press [0] [enter]
Simple:
Press [1] [enter]
Full:
Prres [2] [enter]
Note: When the voice guidance says, "Registration has been failed.", retry Step 2. If set
to mute, the voice guidance "Registration has been completed." is not output.
1
2
accept reject
accept reject
accept reject
No. Procedure
4
When finishing operation, press [.] [enter].
If no operation has been performed for 30 seconds or more, the voice guidance will
say, "Registration has been failed.", and the iris reader will return to the status before
operation.
accept reject