Panasonic BMET200 - IRIS RECOGNITION, Руководство по эксплуатации

Страница: 21 / 86

8
Pin No.
21
1
2
3
4
5
6
7
OFF Tamper detection
cancel Cancels the tamper
detection. Set this
switch to ON when the
front cover is removed
for servicing. Cancel Detect After servicing, set
this switch to OFF.
If the front cover is
attached with this
switch ON, buzzer
sound is activat-
ed.
OFF Ethernet Full/Half Ethernet setting Half Full Available only
when 5 is ON
OFF Ethernet 100 M/
10 M Ethernet setting 10 M 100 M Available only
when 5 is ON
OFF Ethernet auto-
negotiation Ethernet setting Fixed Auto-negotia-
tion _
OFF IP address mode IP address can be set
to the fixed value
regardless of the cur-
rent setting. Set this
switch to ON when the
IP address that has
been set is forgotten. Static IP
address is
assigned. IP address
set by an
administrator Static IP address:
192.168.0.3
OFF
OFF Not used Set this switch to OFF
any time.
− − −
Operation Selects the operation
mode. Stand-alone
mode Network
mode
−
Factory default
OFF Start-up Resets the software to
the factory default. Factory
default soft-
ware Operation
software
−
Setting name Function ON OFF Remarks
●
Setup Switches of Iris Reader
●
Setup Switches of Interface Board SW1
For access control panel
Wiegand
For card reader
RS-485 ter
mination
OFF
RS-485 ter
mination
ON
ON
1 2 3 4
SW1
ON
1 2 3 4
SW2
ON
1 2 3 4
SW1
ON
1 2 3 4
SW2
ON
1 2 3 4
SW1
ON
1 2 3 4
SW2
ON
1 2 3 4
SW1
ON
1 2 3 4
SW2
ON
1 2 3 4
SW1
ON
1 2 3 4
SW2
ON
1 2 3 4
SW1
ON
1 2 3 4
SW2