![background image](http://html1.mh-extra.com/html/panasonic/bl-c140a-outdoor-mpeg-4-network-camera/bl-c140a-outdoor-mpeg-4-network-camera_installation-manual_4075653019.webp)
19
3
Mount the flexible stand firmly to the wall using screw A (included).
• Do not drive the screws into a soft material. Drive the screws into a secure area of the wall,
such as a column, otherwise the camera may fall and be damaged.
• Use screws that are suited for the type of material the camera is mounted to.
• Be careful not to nip the cable.
• Make sure the flexible stand is firmly mounted on a beam (at least 25 mm [1 inch] thick) etc.
When there is no beam, apply a board on the other side of the wall to make sure the
camera does not drop.
4
Pass the cable through the right-angle joint and attach the right-angle
joint by fastening screw B.
• Insert the LAN cable until it clicks into to place.
• Make sure that the “
↑
UP” symbol is pointing up when attaching the right-angle joint to the
camera.
• Securely fasten all screws.
Screw A
At least 25 mm
(1 inch)
Содержание BL-C140A - Outdoor MPEG-4 Network Camera
Страница 30: ...30 Note ...
Страница 31: ...31 Note ...
Страница 32: ... 2008 Panasonic Communications Co Ltd All Rights Reserved PQQX16442YA KK0408CM1068 ...