Panasonic BL-C10 Скачать руководство пользователя страница 84

Страница: 84 / 110

Operating Instructions

3.3

FACTORY DEFAULT RESET Button

The camera has a FACTORY DEFAULT RESET button on the bottom.

Pressing the FACTORY DEFAULT RESET button resets the camera to factory
default. If you lose your user name and password, use this button to reset the
camera.
•

Press the FACTORY DEFAULT RESET button for 1 second when the camera
is on.

•

The indicator blinks orange, and then turns off for 10 seconds.

•

Do not turn off the camera until the indicator lights green.

Notes

•

The internal clock will not be reset, but the time format will return to AM/
PM mode (see page 36). Set it again.

•

See page 85—page 92 for default settings.

•

All buffered images are deleted when resetting the camera to factory
default.

•

The reset operation takes about 1 minute.

2. Press the button

with a pointed
object.

Remove the
cable cover.

Содержание BL-C10















































































































Результаты поиска

Содержание BL-C10

Отзывы:

Похожие инструкции для BL-C10

Бренды по названию

Популярные бренды

Panasonic BL-C10, Руководство по эксплуатации

Результаты поиска

Содержание BL-C10

Отзывы:

Похожие инструкции для BL-C10

Бренды по названию

Популярные бренды