15
Registering PRESET SPEED on the unit
To register the PRESET SPEED value to a preset number of the unit,
perform the following steps after the previous procedure .
5 .
Press the MEM STORE button to turn on its indicator .
6 .
Hold down a number button to specify the preset
number to register .
The current remote camera settings are registered to preset
memory, and PRESET SPEED is registered to the unit .
z
To continue registering a different PRESET SPEED value to a
preset memory belonging to the same “page number”, repeat
steps
3
→
4
→
6
.
Setting the PRESET SPEED recall mode
1 .
Press the MENU button to turn on its indicator .
2 .
Open CAMERA SETUP menu [24] .
3 .
Turn the F1 dial to display the “3 . RECALL PST SPD”
item .
3.RECALL PST SPD
Off
4 .
Turn the F2 dial to select the recall mode, and then
press the F2 dial to confirm the selection .
Off :
Recalling preset memory moves the remote cameras at the
speed of the PRESET SPEED values set on the remote
cameras .
On :
Recalling preset memory moves the remote cameras at the
speed of the PRESET SPEED value registered for each
preset number on the unit .
Operating preset memory (PMEM)
(continued)
