Panasonic AWEX500N - SIGNAL CONVERTER, Руководство по эксплуатации

Страница: 9 / 20

<
Function setting switch 1
This is used to select the operations of the AW-EX500.
Before changing a setting, the power must be turned off.
The setting items are shown below.
1: Input signal setting 1 <SDI/ANALOG>
(Factory setting: ANALOG)
Set this to match the input signals which will be used.
2: Input signal setting 2 <YR-YB-Y, YC/VIDEO>
(Factory setting: VIDEO)
3: Input signal setting 3 <YR-YB-Y/YC>
(Factory setting: YC)
Input signal settings 2 and 3 take effect when
<ANALOG> has been selected as input signal setting 1.
Set as shown below to match the analog signals which
are to be input to analog video input connectors
5 , 6
and
7
.
4: Input signal level setting Y <714mV/700mV>
(Factory setting: 700mV)
When analog component signals have been selected
as the input signals, select this setting by determining
whether the white 100% signal level of the input
signals is 714mV or 700mV.
When VIDEO signals or YC signals are to be input, set
to 700mV.
5: Input signal level setting R-YB-Y <756mV/525mV>
(Factory setting: 525mV)
When analog component signals have been selected
as the input signals, select this setting by determining
whether the color signal level of the input signals is
756mV or 525mV.
When VIDEO signals or YC signals are to input, set to
525mV.
- 9 -
1
2
3
4
5
6
7
8
9
0
O
N
INPUT SEL2 INPUT SEL3 Input signal
VIDEO Y/C VIDEO
VIDEO YR-YB-Y VIDEO
YR-YB-Y, Y/C Y/C Y/C
YR-YB-Y, Y/C YR-YB-Y YR-YB-Y
ON OFF SW NO
PB302 PB310 ADDITIONAL I/F SEL 0
PB302 PB310 OPTION I/F SEL 9
YR-YB-Y RGB PB302 OUT SEL (ADD) 8
YR-YB-Y RGB PB302 OUT SEL (OPT) 7
ADDITIONAL IF OPTION IF RS232C SEL 6
756mV 525mV INPUT LEVEL R-YB-Y 5
714mV 700mV INPUT LEVEL Y 4
YR-YB-Y YC INPUT SEL3 3
YR-YB-Y, YC VIDEO INPUT SEL2 2
SDI ANALOG INPUT SEL1 1