Panasonic AW-UE80WP Скачать руководство пользователя страница 65

Страница: 65 / 168

Fall Acceleration [1 to 255]

Sets the deceleration speed for pan/tilt deceleration operation in 255

steps. (The deceleration speed increases as the number increases)

When it is necessary to reduce the speed to the specified speed using

manual control of pan/tilt by lever operation etc. through the controller,

the deceleration process is performed based on the deceleration

speed specified in this setting.

This is enabled only when [P/T Acceleration] is [Manual].

<NOTE>

• The deceleration and stop processes are carried out right up to

the end of the lens mechanism section and in order to prevent

a collision with the mechanism, in the actual operation, [Fall

Acceleration] may be restricted.

Return

Return to the previous menu level.

The relationships between the various setting values during manual operation of pan/tilt when [P/T

Acceleration] is set to [Manual]

It is possible to specify the responsiveness (maximum speed, acceleration rate, S-curve steps) for operation.

<NOTE>

• When the specified acceleration speed is small, it is not possible to reach the maximum speed of the product.

Range during which the speed reaches the maximum

according to that specified by manual operation of pan/tilt

Acceleration

range

Acceleration time

Deceleration

range

Deceleration

time

[Rise Acceleration]

1 to 255

The larger the value, the shorter the

acceleration time

(It takes less time to reach the speed

specified with manual pan/tilt operation)

[Fall Acceleration]

1 to 255

The larger the value, the shorter the

deceleration time

(It takes less time to reach the

deceleration or stopped status specified

with manual pan/tilt operation)

Maximum speed reached

(Speed specified by manual

operation)

Time when pan/tilt are manually operated

Operation speed

[Rise S‑Curve]

0 to 30

[Fall S‑Curve]

0 to 30

The larger that the value of the S-curve is, the greater

the speed changes when accelerating or decelerating

(represented by the dotted line rather than the solid line), and

the operational feel of acceleration and deceleration changes.

There is no change in the time taken for accelerating or

decelerating with the S-curve setting.

Camera menu items (continued)

Содержание AW-UE80WP









































































































































































Результаты поиска

Содержание AW-UE80WP

Отзывы:

Бренды по названию

Популярные бренды

Panasonic AW-UE80WP, Руководство по эксплуатации

Результаты поиска

Содержание AW-UE80WP

Отзывы:

Бренды по названию

Популярные бренды