Panasonic AW-UE80WP Скачать руководство пользователя страница 63

Страница: 63 / 168

Output 5/5 screen

Output 5/5

Status Lamp Enable

External Output

Output1 Off

Output2 Off

Return

Status Lamp

[Enable, Disable]

[Disable] or [Enable] is set here for the status display lamp.

When you want the status display lamp to stay off while this unit is in

operation, set to [Disable].

<NOTE>

• Even when set to [Disable], the status display lamp may light

up when this unit is starting up, updating firmware, or trouble is

occurring.

External Output

Select the signal type output from the External Output signal lines

(Output1, Output2) of the RS‑422 connector. (→ page 17)

Output1 [Off, R‑Tally, G‑Tally]

Output2 [Off, R‑Tally, G‑Tally]

Off

Signal is not output.

R-Tally

The reception status of the red tally signal is output.

G-Tally

The reception status of the green tally signal is output.

Return

Return to the previous menu level.

Pan/Tilt screen

Pan/Tilt

Install Position Desktop

P/T Speed Mode Normal(60deg/s)

P/T Acceleration Setting

Speed With Zoom Position On

Focus Adjust With PTZ. Off

Privacy Mode Off

Power On Position Standby

Preset Number 001

Return

Install Position

[Desktop, Hanging]

[Desktop] or [Hanging] is selected here as the method used to install

the unit.

Desktop Stand-alone installation
Hanging Suspended installation

<NOTE>

• When [Hanging] has been selected, the top, bottom, left and right

of the images will be reversed, and up/down/left/right control for

panning and tilting will also be reversed.

P/T Speed Mode [Normal(60deg/s), Fast1(90deg/s),

Fast2(180deg/s)]

Set the speed of pan/tilt operation.

Normal(60deg/s)

Pan/tilt operates at normal speed (maximum about

60° per second).

Fast1(90deg/s)

Pan/tilt operates at fast speed1 (maximum about 90°

per second).

Fast2(180deg/s)

Pan/tilt operates at fast speed2 (maximum about

180° per second).

P/T Acceleration Setting

Displays the advanced setting screen for setting the acceleration

speed while starting/stopping a pan/tilt operation. (→ page 64)

Speed With Zoom Position [Off, On]

[Off] or [On] is set here for the function used to adjust the pan-tilt

adjustment speed in conjunction with the zoom magnification.

When [On] is set, the panning and tilting operations will become

slower in the zoom status.

This function has no effect during preset operations.

Focus Adjust With PTZ. [Off, On]

[Off] or [On] is set here for the function which compensates for out-of-

focusing when it occurs during panning, tilting or zooming operations.

When [Off] is set, adjust the focus as required after zooming or set

[Focus Mode] to [Auto].

This is only enabled when [Manual] has been selected as the [Focus

Mode] setting.

Privacy Mode [Off, On]

Sets Off/On the function for facing the camera to the rear when this

unit is switched to Standby mode.

Off

Does not change the camera direction when the camera

is switched to Standby mode. (The camera remains in the

direction it was when the power was turned On)

Moves the camera to face toward the rear when the

camera is switched to Standby mode.

Moves the camera to the position specified in [Power On

Position] when the power is turned On again.

Camera menu items (continued)

Содержание AW-UE80WP









































































































































































Результаты поиска

Содержание AW-UE80WP

Отзывы:

Бренды по названию

Популярные бренды

Panasonic AW-UE80WP, Руководство по эксплуатации

Результаты поиска

Содержание AW-UE80WP

Отзывы:

Бренды по названию

Популярные бренды