manualshive.com logo in svg

Panasonic AW-UE80WP, Руководство по эксплуатации

Поделиться
Скачать
Panasonic AW-UE80WP Скачать руководство пользователя страница 127

„

z

IPv4 network

DHCP [On, Off]

Select the method in which the IP address is configured.

Factory settings:

 Off

<NOTE>

• When [DHCP] is set to [On], AW-RP150/AW-RP60’s automatic 

configuration of IP address (AUTO IP) cannot be used.

IP address(IPv4)

Input the unit’s IP address here when the DHCP function is not 

going to be used. Input an address that will not duplicate an existing 

IP address which has been set for a personal computer or another 

network camera.

Factory settings: 

192.168.0.10

<NOTE>

• Multiple IP addresses cannot be used even when the DHCP 

function is used. For details on the DHCP server settings, consult 

your network administrator.

Subnet mask

Input the unit’s subnet mask here if the DHCP function is not going to 

be used.

Factory settings: 

255.255.255.0

Default gateway

Input the unit’s default gateway if the DHCP function is not going to 

be used.

Factory settings: 

192.168.0.1

<NOTE>

• Multiple IP addresses cannot be used for the default gateway even 

when the DHCP function is used.  

For details on the DHCP server settings, consult your network 

administrator.

„

z

IPv6 network

Manual [On, Off]

Enable or disable manual configuration of the IPv6 address.

On

Enter the IPv6 address manually.

Off

Disable manual entry of the IPv6 address.

Factory settings: 

Off

IP address(IPv6) 

When [Manual] is set to [On], the IPv6 address must be entered 

manually.

Be sure to enter an address unique from other devices.

<NOTE>

• When connecting to the manually specified IP address through a 

router, use an IPv6-compatible router, and enable the automatic 

configuration function for the IPv6 address. Be sure to configure 

an IPv6 address that includes the prefix information provided 

by the IPv6-compatible router. For details, refer to the operating 

instructions for the router.

• Link local address cannot be set.

Default gateway

When [Manual] is set to [On] for [IPv6 network], enter the default 

gateway for the unit’s IPv6 network.

Factory settings: 

blank

<NOTE>

• It is not possible to set the default gateway when [DHCPv6] is [On].

DHCPv6 [On, Off]

Enable or disable use of the IPv6 DHCP function.

Configure the DHCP server so that the same IP address is not 

configured for a personal computer that does not use the DHCP 

function and other network cameras. For details on server settings, 

consult your network administrator.

On

Use the IPv6 DHCP function.

Off

Do not use the IPv6 DHCP function.

Factory settings: 

Off

DNS [Auto, Manual]

Set whether the DNS server address is to be acquired automatically 

(Auto) or to be manually input (Manual).

The DNS setting needs to be performed if [Manual] is set.

When using the DHCP function, if you set to [Auto], then the DNS server 

address will be acquired automatically.

Consult the system administrator regarding the settings.

Factory settings: 

Manual

Primary server address

Secondary server address

Enter the IPv4/IPv6 address of the DNS server.  

For details on the IPv4/IPv6 address of the DNS server, consult your 

system administrator.

126

127

Web screen configurations  (continued)

Содержание AW-UE80WP









































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды