Installation Instructions
System example 4 (connection with commercially available controller)
EXT
MODE
SIGNAL GND
SDI OUT
1/PM
2
G/L IN
PUSH
AUDIO IN(1/2)
POWER/
STANDBY
ACT
LINK
10BASE-T/
100BASE-TX
RS-422
12V IN
HD Integrated Camera AW-HR140
Commercially
available controller
External DC
power supply
Serial connector
Communication
connector
•
Configure the MODE switches at the connector panel of the unit.
For details on the MODE switches, see “MODE switch settings” (→ page 8).
•
Configure the following items in the camera menu.
1.
Display [System] menu - [Protocol] - [Model Select].
2.
Select [SEVIHD1], [SBRC300], or [SBRCZ330] for the protocol type.
<NOTE>
•
The unit is not equipped with a daisy-chain connection function for connecting multiple units.
System example 5 (optical fiber system/audio connection using PoE++)
EXT
MODE
SIGNAL GND
SDI OUT
1/PM
2
G/L IN
PUSH
AUDIO IN(1/2)
POWER/
STANDBY
ACT
LINK
10BASE-T/
100BASE-TX
RS-422
12V IN
HD Integrated Camera AW-HR140
PoE++ compatible switching hub or
injector
DC power supply
DC power supply
SDI monitor
SDI signal
SDI signal
Audio signal (CH1/CH2)
Line input is used for the unit’s external audio input.
When connecting a microphone or other devices with different levels, match the level
using an amp, for example.
Optical fiber cable
SDI/optical signal conversion module
Transmitter
(transmitting side)
Receiver
(receiving side)
16
Connections (continued)
