![background image](http://html.mh-extra.com/html/panasonic/aw-hn38hkp/aw-hn38hkp_operating-instructions-manual_277295084.webp)
84
Web screen configurations
(continued)
z
Others
This item’s setting is reflected when the [Set] button is
pressed.
Install Position
“Desktop” or “Hanging” is selected here as the method
used to install the unit.
Setting value:
Desktop
Stand-alone installation
Hanging
Suspended installation
Factory settings:
Desktop
●
When “Hanging” has been selected, the top, bottom,
left and right of the images will be reversed, and
up/down/left/right control for panning and tilting will also
be reversed.
Preset Speed Table
Set the preset speed table (Slow, Fast).
During preset playback, preset actions are performed at
Preset Speed (1 to 30) values that are based on the table
set here.
Setting value:
Slow
Set the preset speed table to “Slow”.
Fast
Set the preset speed table to “Fast”.
Factory settings:
Fast
Preset Speed
There are 30 preset pan-tilt operation speeds when
regenerating the camera direction and other information
which are registered in the preset memory.
Setting range:
1 to 30
Factory settings:
10
●
If a high value is selected for the Preset Speed
setting, the image on the screen may shake when
operation stops.
Note
Preset Scope
Selected here are the setting items to be recalled when
the contents of the preset memory are regenerated.
Setting value:
Mode A
Pan, Tilt, Zoom (including digital zoom), Focus, Iris,
Gain, White-BAL
Mode B
Pan, Tilt, Zoom (including digital zoom), Focus, Iris
Mode C
Pan, Tilt, Zoom (including digital zoom), Focus
Factory settings:
Mode A
Freeze During Preset
Turn the function for freezing images during preset
playback off/on.
When this is set to “On”, preset playback is performed
with a still of the image immediately preceding the start
of preset playback being output. The image freeze is
released when preset playback is finished.
Factory settings:
Off
●
When this is set to “On”, the start of preset
operations may be delayed momentarily due to the
image being frozen.
●
When HDR is set to “Low” or “High”, this is set to
“Off”.
Notes
Zoom Mode
Configure the maximum zoom magnification.
Setting value:
Opt.Zoom
Use only the optical zoom. Up to 30x*
1
optical
zoom is possible.
*
1
: This is the zoom magnification for the
AW-HN40. The corresponding magnification
for the AW-HN38 is 22x.
i.Zoom
Enable the i.Zoom function.
Enabling this function allows you to perform
electronic zoom while reducing drops in picture
quality.
Combining optical zoom and electronic zoom,
up to 40x*
2
zoom is possible.
*
2
: This is the zoom magnification for the
AW-HN40. The corresponding magnification
for the AW-HN38 is 30x.
D.Zoom
Enable the digital zoom function.
Picture quality degrades as zoom increases
with digital zoom.
D.Extender
Enable the digital extender function.
When this function is enabled, you can
perform optical zoom while maintaining a fixed
digital zoom magnification. Smooth zooming
operations will be possible at the cost of slight
degradation in the image quality.
Factory settings:
i.Zoom
Max Digital Zoom
Set the maximum digital zoom magnification.
This is only enabled when Zoom Mode is set to “D.Zoom”.
Setting range:
x2 to x16
Factory settings:
x16
Содержание AW-HN38HKP
Страница 139: ...139 Memo ...
Страница 140: ...Web Site http www panasonic com Panasonic Corporation 2017 ...