![background image](http://html.mh-extra.com/html/panasonic/aw-hn38hkp/aw-hn38hkp_operating-instructions-manual_277295086.webp)
86
Web screen configurations
(continued)
CAM/BAR
Switch between color bar display and camera image
display on the monitor and the web setup screen.
Setting value:
Camera, Colorbar
Factory settings:
Camera
●
When the color bar is displayed, a test tone (1 kHz)
is output according to the Audio setting in the
camera menu.
Note
Bars Type
Change the type of color bar to display. (page 48)
Setting value:
Type1, Type2
Factory settings:
Type2
Bars Title
Set camera title (page 66) display to Off/On for when
the color bar is displayed.
Factory settings:
Off
z
OSD Mix
OSD Off With Tally
This is used to enable or disable the function for clearing
the OSD menu displays when the tally signal is received
by a command or contact.
When the tally signal is released, the original OSD menu
displays are restored.
Factory settings:
Off
OSD Status
“Off” or “On” is set here for the status display which
appears during AWB operations.
Factory settings:
Off
z
Protocol
Model Select
Set the protocol model for standard serial communication.
Do not select “Reserved1” to “Reserved7”.
Setting value:
SEVIHD1, SBRC300, SBRCZ330,
Reserved1 to 7
Factory settings:
SEVIHD1
Содержание AW-HN38HKP
Страница 139: ...139 Memo ...
Страница 140: ...Web Site http www panasonic com Panasonic Corporation 2017 ...