Panasonic AW-HN130WP Скачать руководство пользователя

Страница: 44 / 56

Operating Instructions

Troubleshooting

Operation

Symptom

Cause and solution

Reference pages

No power

• Is the AC adaptor securely connected to the AC outlet?

– – –

• If the power plug of the AC adaptor connected properly?

– – –

• Is the LAN cable connected securely to the IP control LAN connector

<NDI|HX>?

page 37

• Is the network cable for the PoE+ (IEEE802.at) compatible power supply device

and the unit connected properly?

page 22

• Power may not be supplied if the total power limit is exceeded on power supply

devices that allow connections to multiple PoE+ terminals.

→ Refer to the operating instructions for the PoE+ power supply device.

– – –

• If the unit is connected to the controller, has it been connected properly?

→ Refer to the operating instructions for the controller.

page 19

• When performing operations from a wireless remote control

→ Also refer to the “Cannot operate using the wireless remote control” item.

– – –

Cannot operate

( common to wireless remote control,

controller)

• Is the power on?

→ If the unit’s status display lamp is off or lights up orange, it means that the unit’s

power is not on.

PDF page 22

• The safe mode function may have been activated.

PDF page 108

• Have the limiter functions been set?

PDF pages 106 to 107

• Has the unit you want to operate been selected properly?

PDF page 23

Cannot operate using the wireless

remote control

• Have the remote control’s batteries run down or have the batteries been installed

with their polarities reversed?

→ If the status display lamp does not blink even when the wireless remote control is

operated near the wireless remote control signal light-sensing area, it means that

the batteries have run down. Replace the batteries.

– – –

• Have the IR ID switches been set correctly?

page 37, page 41

• Is there a fluorescent light or plasma monitor near the unit and, if so, is the

wireless remote control signal light-sensing area exposed to its light?

page 35

Cannot operate using the controller

• Is the unit connected to the controller properly?

→ Refer to the operating instructions for the controller.

page 19

• The user authorization and host authorization must be set to OFF when the AW-

RP120, AW-RP50 and AK-HRP200 remote camera controllers are connected in a

network.

PDF page 84

PDF page 85

• It may be necessary to upgrade the version of the controller so that the controller

will support the unit.

→ For details on upgrading, visit the support page on the following website.

http://pro-av.panasonic.net/

– – –

• When using an HTTPS connection, network connection with the AW-RP50, AW-

RP120, and AK-HRP200 will be disabled.

PDF page 90

PDF page 95

The unit turns in the opposite

direction to the one operated

• Has the stand-alone (Desktop) installation setting been selected correctly?

PDF page 53

PDF page 81

• The reversal setting may have been established at the controller if the unit is

connected to the controller.

→ Refer to the operating instructions for the controller.

– – –

Содержание AW-HN130WP

























































Результаты поиска

Содержание AW-HN130WP

Отзывы:

Похожие инструкции для AW-HN130WP

Бренды по названию

Популярные бренды

Panasonic AW-HN130WP, Руководство по эксплуатации

Результаты поиска

Содержание AW-HN130WP

Отзывы:

Похожие инструкции для AW-HN130WP

Бренды по названию

Популярные бренды