Panasonic AW-HE42WP, Руководство по эксплуатации

Страница: 71 / 76

71
Operating Instructions
Troubleshooting
●
Operation
Symptom Cause and remedial action Reference pages
No power
●
Is the AC adaptor securely connected to the AC outlet?
–––
●
Is the power plug of the AC adaptor connected properly?
–––
●
Is the network cable for the PoE+ (IEEE802.3at compliant)
compatible power supply device and the unit connected properly?
P.25
●
Power may not be supplied if the total power limit is
exceeded on power supply devices that allow connections
to multiple PoE+ terminals.

Refer to the operating instructions for the PoE+ power supply
device.
–––
The status display
lamp flashes red
continuously
●
The PoE+ power supply conditions do not meet the
specifications.

Check the power supply device.
P.57
The status display
lamp flashes red
several times
●
An error such as an attempt to perform a recording
operation while an SD card is not inserted has occurred.

Check the event log.
Operating Instructions (PDF)
→
“Web screen configurations”
→
“Maintenance screen [Maintenance]”
→
“System log tab [System log]”
Cannot operate
(common to
wireless remote
control, controller)
●
Is the power on?

If the unit’s status display lamp is off or if it has lit up orange,
it means that the unit’s power is not being supplied.
Operating Instructions (PDF)
→
“How to turn the power on and
off”
●
Have the limiter functions been set?
Operating Instructions (PDF)
→
“Limiters”
●
Has the correct unit to be operated been selected?
Operating Instructions (PDF)
→
“Selecting the units”
Cannot operate
using the wireless
remote control
●
Have the remote control’s batteries run down or have the
batteries been installed with their polarities reversed?

If the status display lamp does not blink even when the
wireless remote control is operated near the wireless remote
control signal light-sensing area, it means that the batteries
have run down. Replace the batteries.
–––
●
Has the IR ID setting been set correctly?
Operating Instructions (PDF)
→
“Camera menu items”
→
“Others 2/4 screen”
→
“IR ID”
Operating Instructions (PDF)
→
“Web screen configurations”
→
“Image screen [Image/Audio]”
→
“System settings tab [System]”
→
“Others”
→
“IR ID”
●
Is there a fluorescent light or plasma monitor near the unit
and, if so, is the wireless remote control signal light-sensing
area exposed to its light?
P.61
Cannot operate
using the
controller
●
Is the unit connected to the controller properly?

Refer to the Operating Instructions of the controller.
P.20 to 25
●
Are all the cameras in the daisy-chain connection turned on?
P.21
●
It may be necessary to upgrade the version of the controller
so that the controller will support the unit.
P.56
The unit turns
in the opposite
direction to the
one operated
●
Has the stand-alone (Desktop) installation setting been
selected correctly?
Operating Instructions (PDF)
→
“Camera menu items”
→
“Others 1/4 screen”
→
“Install Position”
Operating Instructions (PDF)
→
“Web screen configurations”
→
“Image screen [Image/Audio]”
→
“System settings tab [System]”
→
“Others”
→
“Install Position”
●
The reversal setting may have been established at the
controller if the unit is connected to the controller.

Refer to the Operating Instructions of the controller.
–––