Panasonic AW-HE20KP Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 126

Panasonic AW-HE20KP Скачать руководство пользователя страница 5

5

Importer for UK:

Panasonic Connect UK,

a branch of Panasonic Connect Europe GmbH,

Maxis 2, Western Road, Bracknell, Berkshire, RG12 1RT

Read this first!
(For AW-HE20KE, AW-HE20WE, AW-HE20KED, AW-HE20WED) (continued)

ENGLISH

Caution for AC Mains Lead

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.

This product is equipped with 2 types of AC mains cable. One is for continental Europe, etc. and

the other one is only for U.K.

Appropriate mains cable must be used in each local area, since the other type of mains cable is not suitable.

indicates safety information.

FOR CONTINENTAL EUROPE, ETC.

Not to be used in the U.K.

FOR U.K. ONLY

If the plug supplied is not suitable for
your socket outlet, it should be cut off and
appropriate one fitted.

FOR U.K. ONLY

This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 13 amp fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that
the replacement fuse has a rating of 13 amps and that it
is approved by ASTA or BSI to BS1362.
Check for the ASTA mark    or the BSI mark on
  the body of the fuse.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not
be used
until a replacement cover is obtained.
A replacement fuse cover can be purchased from your
local Panasonic Dealer.

How to replace the fuse

1. Open the fuse compartment with a
screwdriver.

Or

2. Replace the fuse.

Or

Fuse

Fuse

«
...
3
4
5
6
7
...
»

Содержание AW-HE20KP































































































































Отзывы:

Нет отзывов