Panasonic AW-HE20KP, Инструкция по эксплуатации, Страница: 104 / 126

104
NTP
Settings relating to the NTP server address and port No. are performed.
This item’s setting is reflected when the [Set] button is pressed.
Synchronization with NTP
[Off, On]
Set whether to use an NTP server by selecting “On” or “Off”.
Setting value:
On Uses an NTP server. (Synchronizes the date and time with the NTP server.)
Off Does not use an NTP server.
Factory settings: Off
NTP server address setting
[Auto, Manual]
Select the method to acquire the NTP server address.
Setting value:
Auto Acquires the NTP server address from the DHCP server.
Manual Sets the address by inputting the NTP server address in [NTP server address].
Factory settings: Manual
[Note]

To acquire the NTP server address from the DHCP server, you need to set
“
DHCP
” (
page 99
)
of
“
IPv4 network
”
on the [Network] tab of the network setup screen [Network] to
“
On
”.