Panasonic AW-E860L, Руководство по эксплуатации, Страница: 52 / 292

$ Setting to initial set
In case of the wrong setting in any use mode, take the
following steps to return to the initial settings.
(1) Select [Initialize Data] on the main menu screen of each
Use Mode. (See page 27.)
Press the YES/ABC switch, then [Initialize Data] screen
shown for about 10 seconds.
(2) Press the YES/ABC switch within about 10 seconds to
return to the initial settings, the existing settings are
initialized, the screen shown at
2 , and the camera
returns to main menu.
(3) If the NO/BAR switch is pressed, or if the YES/ABC
switch is not pressed, within about 10 seconds, the
screen shown at
3 , and the camera returns to main
menu, and the existing settings are not initialized.
- 51 (E) -
Setting to initial set
Note
If you are using an option card, the Option Card Setting
Submenu will not be initialized even if “Return to
Initialize” is performed.
1 2 3