Panasonic AW-E750E, Руководство по эксплуатации

Страница: 34 / 412

- 33 (E) -
[ADJUSTMENT with the RCU, ROP or multi hybrid
control panel)]
4. In the case of the RCU, set the auto white/auto black
selector switch to the AWC position.
In the case of the ROP or multi hybrid control panel,
press the AWC button. This makes it possible to set the
white balance.
While the white balance is being set, the auto setting
indicator LED or AWC button lamp flashes. If the setting
is established successfully, the LED or AWC button lamp
will go off, but if it is not established successfully, it will
light up. If the setting is not established successfully,
proceed with the setting again.
Notes:
• For white balance setting aim the camera at a white object
and try to position it in the centre of the monitor screen.
The object must appear in over 10 % of the total monitor
screen area. Try to avoid overly bright objects in the scene.
• White balance may not be correctly set if the lighting of
the object is too weak.
• Since the camera has a built-in memory, the set white
balance will remain in the memory even if power is turned
off. Therefore, it is not necessary to reset the white
balance if the colour temperature of those objects remains
unchanged. However, it must be reset if the colour
temperature changes, such as when you move from
indoors to outside, or vice versa.
• When the camera is used without a RCU or ROP red/blue
gain adjustment of painting setting will be automatically
reset to ±0 after setting the white balance. (painting setting
in only USER MODE.)
w
AUTOMATIC TRACKING WHITE BALANCE
SETTING (ATW)
White balance will be automatically set to continuously
match changes of light source and colour temperature while
the white balance setting is set to ATW.
Notes:
• ATW might not function properly when high brightness
light (ex. fluorescent lamp) beams into a screen.
• White balance may not be accurately set if there is no
white object in the scene being shot.
Remote control unit
Auto setting indicator
Multi hybrid control panel
AWC button
Remote operation panel
AWC button