Panasonic AW-E750E, Руководство по эксплуатации

Страница: 38 / 412

- 37 (E) -
w
GEN-LOCK ADJUSTMENT
Phase adjustments must be performed with the
camera, RCU, ROP or the multi hybrid control panel
when external synchronizing signals are supplied to the
system in cases where multiple cameras are used or
peripheral devices are connected.
O
HORIZONTAL PHASE CONTROL
Observe the waveform of the external synchronizing
input signal (black burst signal) and video output
signal on a two-channel oscilloscope. Then match the
horizontal phase of both signals by adjusting them with
the horizontal phase control of the camera, RCU, ROP
or multi hybrid control panel.
[ADJUSTMENT by CAMERA or multi hybrid control panel]
1. Press the NO/BAR switch for over 5 seconds to
display the colour bar.
2. Select [G/L Adjustment] on the main menu, then
select [H PHASE] on the submenu.
3. Adjust the horizontal phase with the YES/ABC and
NO/BAR switch.
For details on the menu operations using the multi hybrid
control panel, refer to the Operating Instructions of the
multi hybrid control panel.
NO/BAR Switch
YES/ABC Switch
External gen-lock input signal
(black burst output of special
effect generator)
Video signal
Adjust the horizontal phase