Panasonic AV-HS60C3G, Руководство по эксплуатации

Страница: 77 / 176

– 77 –
Chapter 5 Basic Operations — Switching the AUX output
Switching the AUX output
Selecting the AUX output sources
Display the AUX output image on the monitor using the output settings or the settings of the MultiView display.
You can select AUX1 - AUX16 bus sources in the AUX bus crosspoint by pressing a combination of one of the AUX bus selection buttons <AUX 1/2> -
<AUX 15/16> and the <BUS SHFT> button.
The selection operation depends on the setting selected with top menu <OPR> button
→ [SOURCE LINK] → [Key Assign] tab → [Master/Slave].
Operation [Fill to Source] setting [Source to Fill] setting
Only the AUX bus selection button is pressed Odd numbered buses from AUX1 - AUX15 are
selected
Even numbered buses from AUX2 - AUX16 are
selected
The <BUS SHFT> button + the AUX bus selection
button are pressed
Even numbered buses from AUX2 - AUX16 are
selected
Odd numbered buses from AUX1 - AUX15 are
selected
r
Signals that can be selected on the AUX bus
Signal name Description of signal
SDI IN1 - SDI IN20 SDI input signals 1 to 20
Still 1V, Still 2V Video memory (still image) 1, 2 videos
Still 1K, Still 2K Video memory (still image) 1, 2 keys
Clip 1V, Clip 2V Video memory (moving image) 1, 2 videos
Clip 1K, Clip 2K Video memory (moving image) 1, 2 keys
CBGD1, CBGD2 Color background 1, 2
CBAR Color bar
Black Black image
ME1PGM, ME2PGM Program video signal
ME1PVW, ME2PVW Preview video signal
ME1CLN, ME2CLN Clean signal
ME1KEYPVW, ME2KEYPVW Key preview video signal
DSKPGM1, DSKPGM2 DSK program video signal
DSKPVW1, DSKPVW2 DSK preview video signal
DSKEXT1-1, DSKEXT1-2, DSKEXT2-1, DSKEXT2-2 DSK extended signals
MV1, MV2 MultiView display output signal
@ @
NOTE
t
When the AUX bus image for which the MultiView display output has been selected is displayed on the sub-screen of the MultiView display, the
images are looped as if two mirrors were facing each other.
t
Refer to “ME unit settings” for details about setting preview video signals and clean signals.
Transitions of AUX1 to AUX4 buses
AUX1 to AUX4 buses can perform MIX transitions.
For details, refer to “AUX1 to AUX4 bus transitions”.
Linking AUX buses
Set the <OPR> button on the top menu → [SOURCE LINK] → [AUX Bus Link] tab to link two AUX buses.
For details, refer to “Linking the AUX bus”.