Panasonic AV-HS6000, Руководство по эксплуатации

Страница: 43 / 173

– 43 –
Chapter 4 Preparations — Various settings
[Frame Buffer] tab Make the settings for DVI-D input signals.
[Status] tab
Displays the information on the images for DVI-D input signals.
3
Select the <IN OUT> button
→
[C/C IN 25‑30], [C/C IN 31‑32]
→
[SDI IN 25] to [SDI IN 32] tabs, and make the color corrector
settings.
f
This function will be available in V2.00.00 or higher.
f
Make the settings for color correctors built into the <SDI IN 25> to <SDI IN 32> terminals.
Setting video source names
Set source names displayed on the source name display panels of the Control Panel AV-HS60C1/AV-HS60C2 and the MultiView display.
f
For details, refer to “Setting the source name” (page 119).
1
Select the <CONF> button
→
[SOURCE NAME]
→
[Panel Name]/[MV Name], and make the settings for source names, etc.
Setting video source links
Make the settings for links of key fills and key sources handled as keys. When key fills (key sources) are selected with the KEY bus crosspoint buttons,
the linked key sources (key fills) are selected automatically. Select which of key fill and key source to be set as a master from the menu. The same
setting can be used for the AUX bus link setting.
f
For details, refer to “Selecting the key source” (page 52).
1
Select the <CONF> button
→
[SOURCE LINK]
→
[Key Assign] tab.
2
Assign the items in the slave list at the right row to the items in the master list at the left row.
f
With that, key fill and key source link settings are complete.
f
When enabling/disabling link settings with the AUX bus link settings, proceed to the step 3 .
3
Select the [AUX Bus Link] tab.
4
Select an item in [AUX1/2 Link] to [AUX15/16 Link] in the [Link 1]/[Link 2] column.
[On] Enables link settings.
[Off] Disables link settings.
Button settings
Assigning video sources to buttons
External video input signals and internally generated signals can be assigned to the crosspoint buttons (the PGM/A, PST/B, and KEY bus crosspoint
buttons) in the crosspoint area.
f
For details, refer to “Assigning signals to buttons” (page 118).
1
Select the <CONF> button → [XPT ASSIGN] → [MainPanel]/[SubPanel1]/[SubPanel2] tab, and make the following settings.
[MainPanel] tab Assigns the main control panel.
[SubPanel1] tab*
Assigns the sub control panel 1 (the second Control Panel AV-HS60C1/AV-HS60C2).
[SubPanel2] tab*
Assigns the sub control panel 2 (the third Control Panel AV-HS60C1/AV-HS60C2).
* This function will be available in V2.00.00 or higher.
Disabling button/block operations
Operations can be disabled for each button or block.
f
For details, refer to “Disabling button operations” (page 117).
1
Select the <CONF> button → [BUTTON INHIBIT] → [MainPanel]/[SubPanel1]/[SubPanel2] tab, and make the following settings.
[MainPanel] tab Assigns the main control panel.
[SubPanel1] tab*
Assigns the sub control panel 1 (the second Control Panel AV-HS60C1/AV-HS60C2).
[SubPanel2] tab*
Assigns the sub control panel 2 (the third Control Panel AV-HS60C1/AV-HS60C2).
* This function will be available in V2.00.00 or higher.
Setting button colors
For details on the button color settings, refer to “Setting the button color” (page 134).
Setting output signals
Make various settings for SDI output signals.
f
For details, refer to “Setting output signals” (page 112).
1
Select the <IN OUT> button → [SDI OUT] → [Assign]/[Down Converter] tab, and make the following settings.
[Assign] tab Assigns output matrix.