Panasonic AV-HS6000, Руководство по эксплуатации

Страница: 119 / 173

– 119 –
Chapter 7 CONFIG Menu — Setting the source name
Setting the source name
Setting the source name display panel
Set the display of the source name display panels on the crosspoint area and KEY/DSK operation area.
1
Select the <CONF> button → [SOURCE NAME] →
[Panel Name] tab.
2
Select an item in [Type] in the column that displays the source name to be set.
[Default] Displays the same name as the column name.
[User]
Displays a desired name.
[Picture]*
Displays bitmap data.
* This function will be available in V2.00.00 or higher.
Displaying a desired source name
1
Select the <CONF> button → [SOURCE NAME] →
[Panel Name] tab.
2
Select [Name] in the column that displays the source name to be set.
f
Enter a desired name with the on-screen keyboard.
Displaying bitmap data
@ @
NOTE
t
This function will be available in V2.00.00 or higher.
1
Select the <CONF> button → [SOURCE NAME] →
[Panel Name] tab.
2
Select [Load Picture] in the column to be set.
f
Bitmap data in the memory card inserted to the memory card slot is obtained.
f
For Still 1V to Still 4V/Still 1K to Still 4K/Clip 1V to Clip 4V/Clip 1K to Clip 4K, bitmap data is automatically generated.
r
Bitmap data specification
PNG format file with a 42 ×
52 pixel size is loaded. Color image data is converted to gray scale when being loaded.
Setting the lighting status when the crosspoint area is off
1
Select the <CONF> button → [SOURCE NAME] →
[Panel Name] tab.
2
Select an item in [Color Group] in the column that displays the source name to be set.
f
Select an item from [ColorGroup1] to [ColorGroup8].
For details, refer to “Setting the colors when the buttons are turned off” (page 135).
Setting the MultiView display
Set the MultiView display.
1
Select the <CONF> button
→
[SOURCE NAME]
→
[MV Name] tab.
2
Select an item in [Type] in the column that displays the source name to be set.
[Default] Displays the same name as the column name.
[User]
Displays a desired name.
[Same as Panel]
Links to the setting from the <CONF> button on the top menu
→
[SOURCE NAME]
→
[Panel Name] tab.
f
When [Picture] is selected in the [Panel Name] tab, this setting links to the [Default] setting.
Displaying a desired source name
1
Select the <CONF> button
→
[SOURCE NAME]
→
[MV Name] tab.
2
Select [Name] in the column that displays the source name to be set.
f
Enter a desired name with the on-screen keyboard.