Panasonic AV-HS6000, Руководство по эксплуатации

Страница: 117 / 173

– 117 –
Chapter 7 CONFIG Menu — Disabling button operations
Disabling button operations
For each button or block, the operation can be disabled.
1
Select the <CONF> button → [BUTTON INHIBIT] → [MainPanel]/[SubPanel1]/[SubPanel2] tab.
[MainPanel] tab Assigns the main control panel.
[SubPanel1] tab*
Assigns the sub control panel 1 (the second Control Panel AV-HS60C1/AV-HS60C2).
[SubPanel2] tab*
Assigns the sub control panel 2 (the third Control Panel AV-HS60C1/AV-HS60C2).
* This function will be available in V2.00.00 or higher.
2
Select the buttons/blocks to be disabled from the button/block list in the left column.
f
Select [Button Group] to filter the button/block list in the left column.
3
Set the range of disabled operations.
f
Use [Group Select] and [Bus Select] to set the range of disabled operations.
For details, refer to “Target button/block for [Button Group]/[Group Select]/[Bus Select] operations” (page 117).
4
Select an item in [Inhibit].
[Off] Enables the operation.
[On] Disables the operation.
5
Select [Set].
r
Target button/block for [Button Group]/[Group Select]/[Bus Select] operations
f
The macro bus is not included in the target.
Item Description
[Button Group]
Filters the button/block list in the left column.
[All]: All
[XPT-Page1]: First page of the crosspoint buttons
[XPT-Page1]: Second page of the crosspoint buttons
[XPT-Page1]: Third page of the crosspoint buttons
[XPT-Page1]: Fourth page of the crosspoint buttons
[Other]: <IMAG> button, <2nd PAGE>/<3rd PAGE> buttons, <AUX 1/2> to <AUX 15/16> buttons
[Block]: ME1 block, ME2 block, DSK operation area, positioner area
[Group Select]
Sets the group range for disabled operations.
r
When the first to fourth pages of the crosspoint buttons are selected in the left column:
[All
+
AUX]: All buses including the AUX bus
[All]: All buses excluding the AUX bus
[ME1]: The ME1 bus
[ME2]: The ME2 bus
r
When the <IMAG> button, <2nd PAGE>/<3rd PAGE> buttons are selected in the left column:
[All
+
AUX], [All]: All
[ME1]: Buttons in the ME1 block
[ME2]: Buttons in the ME2 block
[Bus Select]
Sets details of [Group Select] when the first to fourth pages of the crosspoint buttons are selected in the left column.
[All]: All in the [Group Select] setting range
[A/B]: The A bus and the B bus in the [Group Select] setting range
[Key]: KEY1 to KEY4 (including DSK) in the [Group Select] setting range