74
You may choose to think of these audio sources as being associated with the same-numbered
video
inputs in the nearby rows on the rear connector panel. This notional linkage is not strictly enforced,
however.
You can connect directly to any external audio source in the
Advanced Configuration
panel. Also, for
reasons of your own, you may well prefer to treat various audio sources as independent of the nominally
associated video input.
13.4.1 Connection Type
Naturally, only one connection can be active for a given audio input at any moment. To access the
Connection
menu, move the cursor into the label of an input, and click the
Configure
(gear) button that
appears just at right. The
Advanced
Audio Configuration
panel will be shown. The drop-down
Connection
menu at the top of this pane allows the selection of one of the supported sources.
•
By default, local physical sources are listed as
Input 1
,
2
, and so on
•
Follow Video Source
– the default selection, follows the same numbered
Switcher
video input
•
All available NDI (network) audio sources
13.4.2 Analog Audio Input
For most Inputs 1-8, the connection type control at right defaults to either
Auto-Detect
(or
Embedded in
Video
), providing automatic detection of sound from HDMI, SDI and NDI video sources. To connect to
the analog audio input connectors, instead, select Input 2 and then choose the Line option from this menu.
Section 13.5 Skype TX and Mix Minus
The default
Connection
option for external
Audio Mixer
inputs is
Follow Video Source
. When one of AV-
HLC100’s video inputs is assigned to the Skype TX Caller source, the audio control group is thus
automatically assigned to govern incoming audio from that remote Skype caller by default.
Note: It is not necessary to configure a special audio ‘mix minus’ to serve as the return sound for the
remote Skype caller. AV-HLC100 handles this automatically, ensuring that (except when the TalkBack
feature is engaged) the remote caller receives a special mix comprised of the Master mix with the
remote caller’s sound removed.
Section 13.6 TalkBack
The
Audio Mixer
input labeled
TALKBACK
serves a special purpose, providing a way to converse with
remote Skype TX Callers off-air (i.e., without intruding into your live program). You can choose what
audio source to supply for
TalkBack
purposes from a variety of input types, as discussed in the previous
sections.
As mentioned earlier, the default
Connection
option for an external
Audio Mixer
input assigned to a Skype
TX channel allows the corresponding controls to govern audio from the remote Skype caller. In this case
(that is, when an audio control is ‘listening’ to a Skype TX channel), a new button labeled
TALK
is added
beside
the group’s SOLO button.
Содержание AV-HLC100E
Страница 24: ...24 Section 5 3 System configuration ...
Страница 114: ...114 E Appearance Unit mm inch ...
Страница 120: ...Web Site http www panasonic com Panasonic Corporation 2018 ...