Panasonic AV-HLC100E, Руководство по эксплуатации

Страница: 49 / 120

49
Chapter 9 Configure Video Sources
The addition of NDI (Network Device Interface) support to its four
3G SDI and the HDMI input provides AV-HLC100 a full range of
input and output possibilities. Generally, an NDI source needs
little if any configuration, but traditional sources may require you
to choose between optional connection methods and settings.
Note: To receive NDI|HX sources, such as the output from NDI-
enabled Panasonic cameras, the NewTek NDI|HX driver for
Windows
®
must be installed on AV-HLC100.
These settings are provided in the Input Configuration panel for
each Switcher source. As mentioned in the previous chapter, a
configuration gear is shown when you move the mouse-pointer
over a viewport. Clicking this gear, or double-clicking the
viewport (above the label) opens the Input Configuration panel
for the corresponding Switcher input.
Section 9.1 Input Settings Tab
The first tab is labeled Input Settings , and it
allows you to manage all source configuration,
connection and control, and identification
matters.
9.1.1 Source Options
We considered
Source
and
Format
settings back
in passing back in Section 6.8. Let’s look at these
items in a little more detail now.
Local Sources
Local sources are listed first in the Source menu.
Most of the local sources consist of the four hardware inputs found on the back of the system (Input 1
being shared between SDI and HDMI input ports). In addition, you will see an entry labeled
Skype TX
Caller
, which we will discuss later (see Appendix C).
FIGURE 41
FIGURE 42
FIGURE 43