Panasonic AU-V35LT1G, Руководство по эксплуатации

Страница: 159 / 214

– 159 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[FRAME SIG] Sets frame marker aspect ratio.
[1.33:1], [1.44:1], [1.56:1], [1.78:1], [1.85:1], [2.00:1], [2.201:1], [2.35:1], [2.39:1]
f
Factory setting: [2.39:1]
[FRAME COLOR] Sets the color of the frame marker.
[WHITE], [BLACK], [RED], [GREEN], [BLUE], [YELLOW]
f
Factory setting: [WHITE]
[FRAME LEVEL] Sets the level of the outside of the frame marker.
[0%] - [100%] (10% step)
f
Factory setting: [100%]
[USER BOX] Switches enable/disable of the user box display.
[ON], [OFF]
f
Factory setting: [OFF]
[USER BOX WIDTH] Sets the width of the user box.
[1] - [100]
f
Factory setting: [13]
[USER BOX HEIGHT] Sets the height of the user box.
[1] - [100]
f
Factory setting: [13]
[USER BOX H POS] Sets the horizontal position of the center of the user box.
[ − 50] - [50]
f
Factory setting: [0]
[USER BOX V POS] Sets the vertical position of the center of the user box.
[ − 50] - [50]
f
Factory setting: [0]
[VF SDI FOCUS
ASSIST]
[EXPAND MODE] Sets the enlargement display function mode.
[10SEC]: Disables the enlarged display function after ten seconds have elapsed.
[HOLD]: Enables the enlarged display function.
[UNTIL REC]: Enables the enlarged display function until performing recording operation.
f
Factory setting: [10SEC]
[EXPAND1 SW] Switches display/hide of the enlargement display function 1.
[ON], [OFF]
f
Factory setting: [OFF]
[- POS1] Adjusts the source signal position in an enlarged display.
[0] - [8]
f
Factory setting: [4]
[- VALUE1] Adjusts the enlargement factor.
[x2], [x3], [x4]
f
Factory setting: [x2]
[EXPAND2 SW] Switches display/hide of the enlargement display function 2.
[ON], [OFF]
f
Factory setting: [OFF]
[- POS2] Adjusts the source signal position in an enlarged display.
[0] - [8]
f
Factory setting: [4]
[- VALUE2] Adjusts the enlargement factor.
[x2], [x3], [x4]
f
Factory setting: [x2]
[FOCUS IN COLOR SW] Displays/hides the peaking function.
[ON], [OFF]
f
Factory setting: [OFF]
[- PEAKING VALUE] Sets the peaking function mode.
[LOW], [MID], [HIGH]
f
Factory setting: [MID]
[- COLOR SEL] Sets the peaking function color.
[RED], [GREEN], [WHITE]
f
Factory setting: [RED]
[- MONO] Switches enable/disable of the monochrome display function when the peaking function is displayed.
[ON], [OFF]
Even if it is set to [OFF], background image is displayed in monochrome when [MONO SW] is set to [ON].
If it is set to [ON], background image is displayed in monochrome even when [MONO SW] is set to [OFF].
f
Factory setting: [OFF]
[FOCUS SQUARES SW] Displays/hides the focus square function.
[ON], [OFF]
f
Factory setting: [OFF]
[MONO SW] Switches enable/disable of monochrome display function.
[ON], [OFF]
Even if it is set to [OFF], background image is displayed in monochrome when [- MONO] is set to [ON].
If it is set to [ON], background image is displayed in monochrome even when [- MONO] is set to [OFF].
f
Factory setting: [OFF]
[FOCUS DISP] Sets the unit for the focus distance display.
[Meter], [Feet]
f
Factory setting: [Feet]