Panasonic AU-V35LT1G, Руководство по эксплуатации

Страница: 141 / 214

– 141 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[FAN] [FAN SPEED] Select the rotation speed of the fan.
[REC AUTO]: The rotation speed is lowered simultaneously with start of recording. However, the fan will
rotate in appropriate speed for each by [MAIN CODEC] when it reaches the specified temperature. The fan
will rotate at the maximum speed when not recording.
[MATCH CODEC]: The fan will operate in rotation speed appropriate for each in accordance with [MAIN
CODEC].
[ALWAYS FULL]: The fan will always rotate at the maximum speed.
[LIVE]: The fan will always rotate at low speed. However, the fan will operate in appropriate speed for
each by [MAIN CODEC] when it reaches the specified temperature.
f
Factory setting: [REC AUTO]
[GENLOCK] [GENLOCK MODE] Switches the synchronization signal of the camera signal.
[INT]: Synchronizes to the internal standard signal.
[EXT]: Synchronizes to the entered external standard signal.
f
Factory setting: [INT]
[H PHASE COARSE] Roughly adjusts to match horizontal synchronization phase when building a system.
[ − 100] - [100]
f
Factory setting: [0]
[H PHASE FINE] Minutely adjusts to match horizontal synchronization phase when building a system.
[ − 100] - [100]
f
Factory setting: [0]
[CONTROL DISPLAY] [BRIGHTNESS] Adjusts the brightness of the control panel.
[ − 15] - [15]
f
Factory setting: [0]
[COLOR LEVEL] Adjusts the color levels of the control panel.
[ − 15] - [15]
f
Factory setting: [0]
[CONTRAST] Adjusts the contrast of the control panel.
[ − 30] - [30]
f
Factory setting: [0]
[BACK LIGHT] Sets the brightness of the control panel backlight.
[ − 1]: Will be darker than [0].
[0]: Standard brightness.
[1]: Will be brighter than [0].
f
Factory setting: [0]
[BUTTON LED] Illuminates each button of the control panel and the camera.
[ON], [OFF]
f
Factory setting: [ON]
[CLOCK] [CLOCK SETTING] Sets the built-in calendar (year/month/day) and time.
[YEAR]: [2016] - [2037]
[MONTH]: [JAN] - [DEC] ([1] - [12])
[DAY]: [1] - [31] ([28], [29], [30])
[HOUR]: [0] - [23]
[MINUTE]: [0] - [59]
[TIME ZONE] Sets the time zone. After setting the time, when changing the time zone setting, the displayed and
registered times switch to the time with the time difference.
[
−
12:00] - [
+
13:00]
(30-minute interval, without [ + 12:30] and with [ + 12:45])
[DATE FORMAT] Sets the display order of year/month/day.
This is also applied to the recording date displayed in the clip properties.
[Y-M-D]/[M-D-Y]/[D-M-Y]
f
Factory setting: [Y-M-D]
[INFORMATION] [OPERATION TIME] [TOTAL OPERATION]: Displays the operation time of the camera.
[IRIS DIAL]:
Displays the total number of upward turn or downward turn with the operation of the <IRIS/
SEL> dial button on the camera every 100 operations. (“T” indicates the number.)
[VERSION] Displays the information of the camera.
[MODEL]: Displays the product name.
[SERIAL NO.]:
Displays the serial number.
[PRODUCT VERSION]: Displays the version.
[UPDATE] Performs an update of the camera firmware. (Enabled only when there is a dedicated update file on the SD
memory card.)
[YES], [NO]
[USB] Switches the camera to mode for USB device function.
[YES], [NO]
[TRACE LOG] Reads the camera’s execution log from an SD memory card.
[YES], [NO]
[SENSOR TEMP] Displays the temperature around the sensor of the camera.
[LANGUAGE] Switches the display language of the menu.
[ENGLISH], [CHINESE]
f
Factory setting: [ENGLISH]
[INITIALIZE] [LOAD FACTORY DATA] Returns the menu values to their factory settings.
[YES], [NO]