Panasonic AU-EVA1, Руководство по эксплуатации

Страница: 173 / 184

– 173 –
Chapter 9 Notes — Warning system
Screen display
Description Behavior and cause
VIEW screen HOME screen
[ERROR HAS OCCURRED.
TO REPAIR THE CONTROL
DATA, PLEASE CONNECT
AC ADAPTOR OR CHANGE
BATTERY.]
— The remaining battery capacity was low when the
restoring of the management information is started.
A message is displayed.
f
Replace with a fully charged battery, or connect
the AC adaptor.
[INVALID] — Operation is disabled. A message is displayed.
f
Operate after the the operation becomes enabled.
[Cannot record - Playlist capacity
is full.]
— It has tried to record on the SD card which the
number of playlist that can be recorded has
reached the maximum.
A message is displayed.
f
Replace the SD card or delete unnecessary clips.
[Cannot copy - Playlist capacity
is full.]
— It has tried to copied to the SD card which the
number of playlist that can be recorded has
reached the maximum.
A message is displayed.
f
Replace the SD card or delete unnecessary clips.
[Exceeds capacity. Please
reselect.]
— The remaining recordable capacity of the copy
destination SD card is insufficient.
A message is displayed.
f
Reselect the clip to copy, or secure sufficient
remaining recordable capacity in the copy
destination SD card.
[Check the destination media.] — An error has occurred in the copy destination SD
card while copying.
A message is displayed.
f
Confirm the copy destination SD card.
[NO SCENE FILE.] — There is no scene file in the read source SD card. A message is displayed.
f
Insert an SD card that has a scene file.
[SCENE FILE LOAD FAILED] — Reading of the scene file has failed. A message is displayed.
f
Check the SD card.
[SCENE FILE WRITE FAILED] — Writing of the scene file has failed. A message is displayed.
f
Check the SD card.
[DISCONNECT USB CABLE.] — Due to an OS non-compatible error, five minutes
has elapsed until the USB service mode connection
is established.
A message is displayed.
f
Confirm if the OS in use is supported by the
camera.
[CARD LOCKED.] — It has tried to protect or delete a clip in the locked
SD card.
It has tried to copy a clip to the locked SD card.
A message is displayed.
f
Unlock the SD card.
[CANNOT SELECT MORE
CLIPS.]
— It has tried to select more than 99 clips. A message is displayed.
f
Execute the process such as copying by every 99
clips.
[SELECT THE CLIP TO BE
DELETED.]
— It has tried to delete a clip without choosing any. A message is displayed.
f
Select a clip to be deleted.
[SELECT THE CLIPS TO COPY.] — It has tried to copy a clip without choosing any. A message is displayed.
f
Select a clip to be copied.
[Insert a card in slot 1.] — It has tried to copy without inserting the SD card
into the card slot 1.
A message is displayed.
f
Insert an SD card into the card slot 1.
[Insert a card in slot 2.] — It has tried to copy without inserting the SD card
into the card slot 2.
A message is displayed.
f
Insert an SD card into the card slot 2.
[CHECK CARD.] — It has tried to copy to an error card. A message is displayed.
f
Check the SD card.
[CANNOT COPY.] — It has tried to copy a content recorded in a AVCHD
format with a different system frequency (59.94 Hz
system or 50 Hz system) between the copy source
SD card the copy destination SD card.
A message is displayed.
f
Set the system frequency (59.94 Hz system or
50 Hz system) for the contents in the copy source
SD card and the copy destination SD card to be
the same.
f
The system frequency information for the AVCHD
format is confirmed at the time of formatting or at
the first recording.
[CANNOT RECORD.] — Cannot be recorded. A message is displayed.
f
Perform recording after making it possible.