Panasonic AU-EVA1, Руководство по эксплуатации, Страница: 101 / 184

– 101 –
Chapter 4 Operation — Menu setting contents
[ZEBRA2 DETECT]
Sets the detection level of zebra pattern 2.
The items that can be set are as follows.
f
[0%]…[109%]
(Factory setting: [100%])
[ZEBRA2]
Enables/disables zebra pattern 2 and selects [SPOT].
The items that can be set are as follows.
f
[ON], [SPOT], [OFF]
(Factory setting: [OFF])
[WFM MODE]
Sets the display of the waveform monitor. Displaying of the waveform and the vector can be switched.
[WAVE] Displays the waveform.
[VECTOR] Displays the vector.
[WAVE/VECTOR] Displays the waveform and the vector.
It will switch in the order of waveform, vector, and no display every time the USER button with [WFM] assigned is pressed.
(Factory setting: [WAVE])
[WFM TRANSPARENCE]
Sets the transmittance of the waveform monitor.
The items that can be set are as follows.
f
[0%], [25%], [50%]
(Factory setting: [25%])
[SPOT METER UNIT]
Sets the display unit for the spot meter.
This is fixed to [%] when set to anything other than the [SYSTEM SETTINGS] menu
→ [COLOR SETTINGS] → [MAIN] → [V-Log].
The items that can be set are as follows.
f
[STOP], [%]
(Factory setting: [STOP])
[SPOT METER SIZE]
Sets the size of area to detect with the spot meter display function.
The items that can be set are as follows.
f
[S], [M], [L]
(Factory setting: [M])
[LCD LEVEL GAUGE]
[LEVEL GAUGE]
Displays/hides the level gauge.
The items that can be set are as follows.
f
[ON], [OFF]
(Factory setting: [ON])
[LEVEL GAUGE RESET]
Sets the horizontal and vertical reference value set by [LEVEL GAUGE SET] in the USER button to the factory setting.
The items that can be selected are as follows.
f
[YES], [NO]
[COLOR BARS]
[COLOR BARS TYPE]
Sets the color bar to be used.
[SMPTE] Uses the color bars in SMPTE standard.
[FULL] Uses the full color bars.
(Factory setting: [SMPTE])
[TEST TONE]
Sets if the audio test signal (tone signal of rating level 1 kHz) is output or not when the color bars are displayed.
The reference level varies depending on the setting in the [AUDIO SETTINGS] menu
→ [AUDIO CH SETTINGS] → [HEAD ROOM].
The items that can be set are as follows.
f
[ON], [OFF]
(Factory setting: [ON])