Panasonic AKHRP900P - CAMERA CONTROLLER HC, Руководство по эксплуатации

Страница: 17 / 24

17
The communication speed is factory-adjusted to 38.4Kpbs.
In case it does not match the communication speed of multi-purpose camera AK-HC900P,
the alarm LED is lighted. Remove the rear panel and change the DIP SW on the board
and adjust it to the communication speed of the camera.
SW3
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
5 6 7 8
Change the
communication report
by the combination of
SW3 No.1 and No.2 on
ROP CPU board.
125Kbit/Sec
38.4Kbit/Sec
9600Kbit/Sec
SW5 SW4 SW3
Remove the
screw and open
the bottom
plate, then DIP
SW can be seen
in there.
Communication Speed Setting