background image

2

For Your Safety

FCC Note:
This device complies with Part 15 of the
FCC Rules. To assure continued
compliance follow the attached instal-
lation instructions and do not make any
unauthorized modifications.

This equipment has been tested and
found to comply with the limits for a Class
A digital device, pursuant to Part 15 of
the FCC Rules. These limits are de-
signed to provide reasonable protection
against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates,
uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instruction manual,
may cause harmful interference to radio
communications. Operation of this equip-
ment in a residential area is likely to
cause harmful interference in which case
the user will be required to correct the
interference at his own expense.

1

 is the safety information.

CAUTION

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with
arrowhead symbol, within an
equilateral triangle, is intended to
alert the user to the presence of
uninsulated “dangerous voltage”
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.

The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and main-
tenance (servicing) instructions
in the literature accompanying
the appliance.

CAUTION:

TO REDUCE THE RISK OF FIRE OR
SHOCK HAZARD AND ANNOYING
INTERFERENCE, USE THE RECOM-
MENDED ACCESSORIES ONLY.

WARNING:

TO REDUCE THE RISK OF FIRE OR
SHOCK HAZARD, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.

The serial number of this product may
be found on the bottom of the unit.

This class A digital apparatus complies
with Canadian ICES-003.
Cet appareil numérique de la classe A
est conforme à la norme NMB-003 du
Canada.

For CANADA

12 Volt Class 

II

 Power Supply Only.

(For Example: AW-PS505P)

For Your Safety

Содержание AKHRP900P - CAMERA CONTROLLER HC

























Отзывы: