Panasonic AK-SHB800G, Руководство по эксплуатации, Страница: 76 / 92

– 76 –
Chapter 5 Connecting to External Devices — Connecting the remote operation panel (AK-HRP1000)
Connecting the remote operation panel (AK-HRP1000)
f
Some of the functions can be controlled remotely by connecting the remote operation panel AK-HRP1000 (optional).
@ @ NOTE
t
The software on the remote operation panel needs to be changed to be specifically for AK-SHB800 and AK-SHU800. For details, contact your dealer.
t
A remote operation panel that has had its software changed to be specifically for AK-SHB800 and AK-SHU800 cannot be connected to or operate
other than 8K devices.
t
You will need to register the user account that has been registered on the remote operation panel AK-HRP1000. Refer to Chapter 6, Network Settings
Serial connection with the <ROP> terminal
MENU
SELECT
USER 1
USER 2
ROP
FRONT
REAR
G/L ON FAN ALARM
STATUS
OPTICAL LEVEL
CAM
IPU
1 2 3 4 5
TALLY CAMERA No.
POWER
RESERVE ROP AUX TRUNK COMMUNICATION LAN
IN
OUT
75 Ω
AUTO
HD SDI OUT HD SDI PROMPT
1 2 IN
IN
OUT
OUT
SDI OUT
OPT
AC IN 〜
SIGNAL GND
REF
1 2 3 4
〈ROP〉terminal
AK-HRP1000
Front panel
Rear panel
1
Connect the <ROP> terminal to the <CCU> terminal of the remote operation panel AK-HRP1000.
2
Set the [CONNECT SETTING] menu to [Serial] with the remote operation panel AK-HRP1000.
@ @ NOTE
t
For the connection cable, refer to the “ROP” in “Details of the connector signals”. (page 89)
t
Consult your dealer for details regarding connection and operation.
IP connection with the <LAN> terminal
RESERVE ROP AUX TRUNK COMMUNICATION LAN
IN
OUT
75 Ω
AUTO
HD SDI OUT HD SDI PROMPT
1 2 IN
IN
OUT
OUT
SDI OUT
OPT
AC IN 〜
SIGNAL GND
REF
1 2 3 4
〈LAN〉terminal
AK-HRP1000
Rear panel
1
Connect the <LAN> terminal to the <LAN> terminal of the remote operation panel AK-HRP1000.
f
Use the LAN cross cable when connecting without going through a hub.
f
Use the LAN straight cable when connecting going through a hub.
2
Set the [CONNECT SETTING] menu to [LAN] with the remote operation panel AK-HRP1000.
@ @ NOTE
t
Supply the power of the remote operation panel AK-HRP1000 from the <LAN> terminal.
t
Use an Ethernet hub and the PoE injector when supplying PoE power from the <LAN> terminal.
t
For the Ethernet hub and the PoE injector that the operation have been confirmed, contact your dealer
t
Consult your dealer for details regarding connection and operation.