14
Parts and their functions
(continued)
15
CAMERA
No.
DATA
SET
DISPLAY SELECT
UP
DOWN
SET UP
ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED
10-19
CC
SHT
SYNC
SELECT
EXECUTE
EXIT
SAVE/LOAD
SHIFT
+
UP+DOWN
27
30
22
35
37
25
26 29 32
24
23
28 33 34 31
36
22.
DATA SET button <UP>
Use this button to increase set values when ND filter/CC filter,
M.GAIN or SHUTTER/SYNCRO is displayed. Each press of the
button increases the set value.
On:
Enabled
Off:
Disabled
<Note>
The CC filter cannot be used on the AK-HC3800 studio handy
camera.
23.
DATA SET button <DOWN>
Use this button to decrease set values when ND filter/CC filter,
M.GAIN or SHUTTER/SYNCRO is displayed. Each press of the
button decreases the set value.
On:
Enabled
Off:
Disabled
<Note>
The CC filter cannot be used on the AK-HC3800 studio handy
camera.
24.
Setting display (4 digits)
This function indicates settings.
It indicates IRIS values when the power is on. Pressing one of the
display select buttons displays the selected setting. It displays the
range of settings and standard position (default setting).
Item
Adjustable range
Display
Standard
position
IRIS
_
■■■
ND
1 to 4
1: Clear
2: 1/4
3: 1/16
4: 1/64
■
___
1
CC
Not supported by the
AK-HC3800 studio handy
camera.
_
■
__
1
M.GAIN
−3 to 12 (in 3 dB steps), 18,
27, 36
• Depends on camera
setting.
■■
__
0
M.PED
_
■■■
0
SHUTTER
- At 59.94 Hz
STEP: 1/100 to 1/2000
SYNCRO: 61.7 to 6130
- At 50 Hz
STEP: 1/60 to 1/2000
SYNCRO: 51.5 to 6250
■■■■
-
25.
IRIS display <IRIS>
The setting display lights green when an IRIS setting is displayed.
It indicates IRIS values when the power is on.
Operating the Iris lever when the setting display shows something
other than IRIS will replace this indication with the IRIS value for
about 2 seconds.
26.
ND filter/CC filter DISPLAY SELECT button <ND/CC>
SAVE/LOAD button <SAVE/LOAD> (In setup mode)
Press this button to display and change set values for the ND or CC
filters.
On (white):
Displays the ND filter and CC filter settings
Off:
Displays settings other than the ND filter and CC filter
settings
<Note>
The CC filter cannot be used on the AK-HC3800 studio handy
camera.
z
Setting and displaying the ND filter and CC filter
1. Press <ND/CC> when IRIS or other (M.GAIN/M.PED or
SHUTTER) DISPLAY SELECT status is displayed.
The button lights and the ND filter display <ND> lights green.
(However, when the ND filter or CC filter is not at the standard
position, the display always lights yellow)
2. Press the lit DATA SET button <UP> <DOWN>.
This allows you to change the ND filter setting.
3. Press <ND/CC> again.
The ND filter display <ND> goes off, the CC filter display <CC>
lights green and the setting display indicates the CC setting.
Press the lit DATA SET button <UP> <DOWN> to change the
CC filter setting.
Since the AK-HC3800 is not equipped with a CC filter function,
a bar display appears.
4. Press <ND/CC> again.
The button goes off and the ND filter display <ND> and CC
filter display <CC> go off. (However, when the ND filter or CC
filter is not at the standard position, the display stays yellow)
Then the setting display returns to IRIS indication.
Pressing another DISPLAY SELECT button (<M.GAIN/M.PED>
or <SHUTTER>) turns off the button and lights the selected
button.
In setup mode, use it to switch submenus.
For details on setup mode, refer to Operations and Settings on the
supplied CD-ROM.
27.
ND filter display <ND>
The setting display lights green when ND filter settings are displayed.
When the ND filter setting is not at the standard position, the setting
display always lights yellow regardless of what it shows.
(Standard position: 1)
28.
CC filter display <CC>
The setting display lights green when CC filter settings are displayed.
When the CC filter setting is not at the standard position, the setting
display always lights yellow regardless of what it shows.
(Standard position: 1)
<Note>
The CC filter cannot be used on the AK-HC3800 studio handy
camera.
