10
Installation
Example of mounting the camera onto a fixture or tripod made by
another manufacturer
b
c
d
a
e
f
i
j
k
g
h
When using the inch screws (3/8-16 UNC)
a: Wire mounting screw (supplied) (screw: M4)
b: Drop prevention wire (optional)
c: Flange nut (supplied)
d: Fixture or tripod made by another manufacturer (optional)
e: Wire mounting screw (supplied) (screw: M4)
Purchase a commercially available M4 screw separately when the length of the screw is not enough.
f: Screw hole
Drill a hole of 5 mm (3/16 inches) diameter.
g: Camera mounting screw holes
h: Screw hole
Drill a hole of 10 mm (13/32 inches) diameter.
i: Flat washer (to be obtained by customer)
j: Spring washer (to be obtained by customer)
k: Mounting screws (to be obtained by customer) (inch screw: 3/8-16 UNC)
Installation Instructions
