manualshive.com logo in svg

Panasonic AK-HC5000, Руководство по эксплуатации

Поделиться
Скачать
Panasonic AK-HC5000 Скачать руководство пользователя страница 98

– 98 –

Chapter 6 Maintenance — Warning displays

[ASU NG]

[ABB MPED NG]

An error in master pedestal has occurred.

Check the master pedestal settings of automatic black balance.

[ASU NOT RUNNING(BAR)]

Automatic setup is prohibited.

[ASU NOT RUNNING(TEST)]

Automatic setup is prohibited.

[ASU NOT RUNNING(D.EXT)]

Automatic setup is prohibited.

Other warning displays

[FAN OFF]

Fan has stopped.

[MAIN MENU] 

→

 [MAINTENANCE] 

→

 [FAN SETTING] 

→

 [FAN] 

→

 [FAN MODE] 

→

 [OFF] is set.

[UPDATE ERROR!]

[ERRCODE:01]

The version update file is invalid.

Store the correct version update file in the SD memory card, and the execute the update again.

[UPDATE ERROR!]

[ERRCODE:02]

The version update file does not exist.

Store the correct version update file in the SD memory card, and the execute the update again.

[UPDATE ERROR!]

[ERRCODE:03]

Mounting error of the SD memory card.

The SD memory card may not be inserted, or the SD memory card may be damaged.

[UPDATE ERROR!]

[ERRCODE:04]

File load error.

The SD memory card may be ejected during the version update, or the version update file in the SD memory card may 

be corrupted.

[UPDATE ERROR!]

[ERRCODE:05]

An error has occurred during the ROM erase for overwriting the version update file.

Consult the dealer.

[UPDATE ERROR!]

[ERRCODE:06]

An error has occurred during the ROM write for overwriting the version update file.

Consult the dealer.

[UPDATE ERROR!]

[ERRCODE:07]

The version update file is invalid.

Store the correct version update file in the SD memory card, and the execute the update again.

[UPDATE ERROR!]

[ERRCODE:08]

Other system error. (Communication error, etc.)

Consult the dealer.

[TEMP OVER!]

[FORCE POWER OFF!!]

The internal temperature is high.

The power is turned off forcefully.

Operate the fan when set to [MAIN MENU] 

→

 [MAINTENANCE] 

→

 [FAN SETTING] 

→

 [FAN] 

→

 [FAN MODE] 

→

 [OFF].

Содержание AK-HC5000














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды