Panasonic AK-HC5000, Руководство по эксплуатации

Страница: 65 / 109

– 65 –
Chapter 4 Menu Operations — Menu list
Item Description of settings
[SKIN AREA TONE] Finely adjusts the tone of the skin tone area.
[ − 127]…[ + 126]
f
Factory setting: [0]
[DNR]
Item Description of settings
[DNR SW] Enables/disables the dynamic range stretcher function.
[OFF], [ON]
f
Factory setting: [OFF]
[DNR LEVEL] Sets the level of the dynamic range stretcher.
[1]…[5]
f
Factory setting: [3]
[SCENE FILE]
Item Description of settings
[MODE] Selects the operation mode.
[LOAD], [STORE]
f
Factory setting: [LOAD]
[FILE NO.] Selects a file number.
When [MODE] is [LOAD]: [OFF], [1]…[8]
When [MODE] is [STORE]: [1]…[8]
f
Factory setting: [1]
[FILE NAME] Enters a file name. (15 characters or less)
f
Factory setting: [SCENE1]
[EXECUTE] Selects whether to execute with the configured settings.
[NO], [YES]
[ROP CONTROL]
Item Description of settings
[CONTROL ROTATION MODE] Sets the control rotation mode of ROP.
[MODE1], [MODE2]
f
Factory setting: [MODE2]
[SYSTEM MODE]
[FORMAT] cannot be selected right after the power is turned on, because boot of the camera is in progress.
This is not an error. Perform operation after a while.
Item Description of settings
[FORMAT] Sets the system format.
[1080/59.94p], [1080/50p], [1080/29.97p], [1080/25p], [1080/23.98p], [1080/59.94p-240fps],
[1080/50p-200fps]
f
Factory setting: [1080/59.94p]
[SHOOTING MODE] Sets the shooting mode.
[NORMAL], [HIGH SENS]
f
Factory setting: [NORMAL]
[CABLE CONNECTION] Set the connection method used between the camera and CCU.
[HYBRID], [FIBER]
f
Factory setting: [HYBRID]
[IN/OUT SELECT]
Item Description of settings
[CALL TALLY] Sets whether the rear tally lamp is to be lit up when called.
[OFF]: Turned off.
[R]: Red tally lights up.
[T]: Up tally lights up.
[R&T]: Red tally and up tally light up.
f
Factory setting: [OFF]
[TALLY GUARD] Enables/disables automatic white balance, automatic black balance, and automatic setup when the tally
lamp is lit.
[OFF], [ON]
f
Factory setting: [OFF]
[HD-SDI1 OUT] Configures the video output from the <HD SDI1> terminal.
[CAM]: Outputs camera images.
[HD PROMPT]: Outputs HD prompter video images.
f
Factory setting: [CAM]