79
7
Chapter 7 Menu description tables
Item
Variable
range
Remarks
RETAKE MODE
ON
OFF
For selecting whether or not to allow retake
operations (MODE CHECK RET
switch).
Item
Variable
range
Remarks
VIDEO OUT SEL
VBS
VF
Y
SDI
VBS:
Normal composite output.
VF:
The Y signal of the viewfinder is output
as is. It is accompanied by a status
display.
Y:
Component Y output.
SDI:
SDI output (this setting can be selected
only when the SDI option is provided).
OUTPUT CHAR
TC
STATUS
MENU
ONLY
For setting the kind of characters to be mixed
at the VIDEO OUT (ANALOG or SDI) and
MON OUT connectors.
TC:
The time code is displayed. (The
menu is displayed when the
menu appears.)
<Note>
The time code display position moves vertically in
accordance with the camera ID position.
STATUS:
All the same characters as the ones
superimposed on the viewfinder are
displayed. (The menu is displayed
when the menu appears.)
MENU ONLY:
Only the menu is displayed.
Normally, nothing is displayed.
MONITOR OUT
CHAR
ON
OFF
For selecting whether or not the characters
are to be superimposed onto the monitor
output signal. (The characters are the same
as the ones for the video output signal.)
ON:
The characters are superimposed.
(This item is not linked to VIDEO OUT
CHARACTER switch.)
OFF:
The characters are not superimposed.
(This item is not linked to VIDEO OUT
CHARACTER switch.)
7-2-4
OUTPUT SEL
SC PHASE FINE
–75
:
+00
:
+75
For finely adjusting the SD phase during genlock.
<Note>
When making GENLOCK adjustments to the unit,
adjust H PHASE first, followed by SC PHASE.
Item
Variable
range
Remarks
GENLOCK
INT
EXT
26P EXT
For selecting the sync signal among the
camera signals.
INT:
For synchronizing with the internal
reference signal regardless of the
reference signal which has been
supplied to the GENLOCK IN connector.
EXT:
For synchronizing with the reference
signal which has been supplied to
the GENLOCK IN connector.
26P EXT:
For synchronizing with the signal
input via the 26-pin jack.
H PHASE COARSE
–50
:
+00
:
+50
For making coarse adjustments to the
horizontal phase when setting up a system.
H PHASE FINE
–160
:
+000
:
+160
For making fine adjustments to the horizontal
phase when setting up a system.
<Note>
This adjustment also affects the SC phase.
SC PHASE
COARSE
0
1
:
3
For coarsely adjusting the SC phase during
genlock.
7-2-5
GENLOCK
VF MODE
EE/PB
EE
EE/PB:
The images are played back in the
playback mode.
EE:
The camera images are displayed all
the time.
<Note>
The REC TIME, PAUSE TIME and TOTAL REC TIME values
are given in terms of the drop frames during drop frame
operations and in terms of non-drop frames during non-drop
frame operations. The TAKE TOTAL TIME value is the actual
time. This means that a fraction may apply to the TOTAL
REC TIME depending on the setting used.
Example in the case of drop frame operation
PAUSE TIME
02s00f
REC TIME
02s00f
TAKE TOTAL TIME
40min
TOTAL REC TIME
19m59s06f
The underlining in the variable range column indicates the setting in the preset mode.
