108
Using USB Connectors and SD/SDHC Memory Cards: Using This Unit With a Hard Disk
Use this function to view hard disk information.
1
Switch to the USB host mode.
2
Connect a USB hard disk.
3
Open the thumbnail screen.
4
Press the MENU button.
5
Use the cursor buttons to choose [HDD] –
[EXPLORE] and press the SET button.
◆
NOTE:
• Use the right and left cursor buttons to switch between date lists
and partition names.
1)
Display status
The name of the screen (HDD-EXPLORE)
2)
Disk information
The following information appears.
3)
Partition information
➝
Details are provided on the next page.
◆
NOTE:
• The partition information for an invalid partition on a P2
store is indicated in gray.
• Only information for the primary partition is displayed for a
hard disk that is formatted using FAT.
4)
USB HOST
The USB host mode indicator
5)
Hard disk drive status
Indicates whether or not a hard disk is connected and
hard disk type.
◆
NOTE:
• To name a partition (up to 20 characters), choose
[CHANGE PARTITION NAME] in the [OPERATION] menu
in hard disk thumbnail screen.
Displaying Hard Disk Information (Explorer Screen)
2)
1)
3
)
4)
5)
Hard disk that
makes it possible
to read and write
data by the card.
PARTITION:
TYPE S/
P2STORE
VENDOR:
Name of vendor
MODEL:
Model name
SIZE:
Size (unit: GB)
USED:
Memory used
(unit: GB)
Used P2 card
area (unit: cards)
up to 23 cards
REMAIN:
Remaining
memory
(unit GB)
Regular hard disk PARTITION:
FAT/OTHER
VENDOR:
Name of vendor
MODEL:
Model name
SIZE:
Memory used
(unit: GB)
