Panasonic AJD650 - DVC PRO VTR Скачать руководство пользователя страница 14

Страница: 14 / 65

Tapes

Three types of tapes can be used with the unit.

Type

Description

Tape designed exclusively for the camcorders used by consumers in

Consumer

general. Only playback is possible using the optional cassette adaptor.

cassette

Use of Panasonic consumer DV cassette tapes is recommended.

(S cassette)

Note that inserting a cassette tape without using the cassette adaptor

can damage the unit.

Recording/playback tape with a maximum capacity of 63 minutes.

M cassette

(AJ-P12MP, AJ-P23MP, AJ-P33MP, AJ-P63MP)

Recording/playback tape with a maximum capacity of 123 minutes.

L cassette

(AJ-P64LP, AJ-P94LP, AJ-P123LP)

Align the cassette with the center of the insertion slot and push it in gently. The cassette
tape is loaded automatically.

<Notes for playback of consumer DV cassette tape>
• Consumer tapes are for playback only, they cannot be recorded upon by the AJ-D640/AJ-

D650.

• Consumer cassette tapes recorded in LP mode cannot be played back.
• Material recorded on consumer tape must be played back and edited to another

professional VTR.

• The recording functions, recording, Tape/EE and others will not function when Consumer

tape is inserted in the VTR.

• Consumer tape FF/REW speed is VTR limited to ±32×. Slow motion playback is not

possible with consumer cassette tapes.

• In order to protect the tape, the maximum STILL TIMER for consumer tape is 10 seconds,

and the available time for leaving the tape in STILL mode during STEP FWD mode is set
at 1 minute.

• Control (CTL) signals are not displayed when consumer tapes are used. Only the time

code is displayed.

– 1 4 –

Содержание AJD650 - DVC PRO VTR


































































Результаты поиска

Содержание AJD650 - DVC PRO VTR

Отзывы:

Похожие инструкции для AJD650 - DVC PRO VTR

Бренды по названию

Популярные бренды

Panasonic AJD650 - DVC PRO VTR, Руководство по эксплуатации

Результаты поиска

Содержание AJD650 - DVC PRO VTR

Отзывы:

Похожие инструкции для AJD650 - DVC PRO VTR

Бренды по названию

Популярные бренды