Panasonic AJD650 - DVC PRO VTR, Руководство по эксплуатации

Страница: 27 / 65

SYSTEM menu
<SYSTEM>
Item
Setting
Superimposed
display
Superimposed
display
Description
No. No.
00 SYS SC
COAR.
System phase rough adjustment: 90° units
0000 0
0001
90
0002 180
0003 270
- 1 2 7
0
127
<Note>
When shipped from the factory, the setting values do not
change even if setting operations are performed.
System phase fine adjustment: Total variable range:±90° or
more
-:
advanced
+: delayed
01
SYS SC
FINE 0000
0127
0255
0000
0112
0224
SYS H - 1 1 2
0
112
00
ENCODER 0000 OFF
SEL
0001 ON
02
System phase adjustment: ±2
µ
sec (SC cycle phase)
-: Advanced
+: Delayed
<Note>
When shipped from the factory, the setting values do not
change even if setting operations are performed.
This selects whether the ENCODER connector functions.
0: Does not functions.
1: Functions.
10 AV PHASE 0000
0128
0255
- 1 2 8
0
127
This adjusts the audio output phase with respect to the video
output: 20.8
µ
s steps
-: The audio output phase is advanced with respect to the
video output.
+: The audio output phase is delayed with respect to the
video output.
The underline on the setting item denotes the initial setting.
USER menu
<BASIC>
Item Setting
Description
Superimposed
display
P-ROLL
TIME
CHARA
H-POS
Superimposed
display
0S
5S
15S
No. No.
0 0 0 0
0005
0015
0000
0005
0012
000 This sets the preroll time which can be set from 0 to 15 seconds
in 1 -second increments.
<Note>
In the case of AJ-D640, the unit will not operate if the preroll
time is set to 0 seconds when the unit is set to automatic
editing (PREVIEW, AUTO EDIT COMMAND) from an
external controller.
001
This sets the position of the characters on the horizontal
plane for the time code and other super displays output to the
VIDEO OUT 3 connector.
<Note>
1. When setting this item, the DISPLAY SEL status is output to
VIDEO 3 even if SUPER OFF has been set. However, when
the menu is exited, operation complies with the SUPER
OFF/ON setting.
Also, CHARA TYPE is output to VIDEO 3 according to the
status set in the menu.
2. When the DISPLAY SEL setting causes characters to
extend beyond the edges of the screen, the setting value is
changed so that the characters are automatically displayed
in a position on the screen.
0
5
12
The underline on the setting item denotes the initial setting.
– 2 7 –