I-4
ITALIANO
6
Posizionare l’unità AJ-YBX200G nel
terminale della scheda al punto
5
e fissarla
tramite le quattro viti da 2,6 mm.
7
Ricollegare il cavo rimosso al punto
5
come era in origine.
8
Reinserire la scheda N. 5 nella posizione
originale. Durante questa operazione,
consentire che il cavo collegato al punto
7
possa scorrere lungo lo slot della scheda
N. 5. (Vedere figura
5
) Inserire i cavi
flessibili rimossi al punto
4
nelle posizioni
originali.
9
Rimettere il pannello laterale nella
posizione originale e fissarlo utilizzando le
viti. Durante questa operazione, verificare
che il cavo scollegato al punto
5
non
rimanga incastrato nello slot.
Se i cavi flessibili non sono bloccati o la scheda
è inserita in posizione storta, il camcorder
potrebbe avere problemi di registrazione.
Viti da 2,6
mm
00.AJ-YBX200G(VQT1K80).book 4 ページ 2007年7月6日 金曜日 午後7時40分