Panasonic AJ-YA93P, Руководство по эксплуатации

Страница: 4 / 31

E-6
ENGLISH
E-5
7.
Set the optional board.
8.
Insert the optional board into slot [4] in the AJ-SD93
with the connector located to the side of the rear panel.
Take care not to pinch
the DV connector cable.
If this cable is sticking
out, put it back
between two boards.
Take steps to ensure
that the cable is not
caught or sandwiched
when screwing the
top panel back on.
The underlined item denotes the factory setting.
9.
Attach the board clamp using the two screws.
Switch no. Purpose of setting
SW1
AUDIO INPUT IMPEDANCE SW
For setting the audio input impedance of
channels 1 and 2
HIGH/600
Ω
SW100
AUDIO INPUT IMPEDANCE SW
For setting the audio input impedance of
channels 3 and 4
HIGH/600
Ω
Slot [4]
connector
DV connector cable
SW1 SW100
Board clamp
6.
Mount the terminal board using the four screws.
Terminal board