78
Chapter 6 Manuipulating Clips with Thumbnails
(continued)
6-2 Thumbnail Screen
Press the THUMBNAIL button to display the thumbnail
screen on the LCD monitor. Pressing the THUMBNAIL
button again returns the display to the regular display. When
switching is done from the regular screen display to the
thumbnail screen display, all the clips will be displayed on
the thumbnail screen.
Also, pressing the MENU BAR button in the thumbnail
screen moves the pointer to the menu bar and enables
thumbnail menu manipulation.
<Note>
With the TCG switch positioned at [SET], when the time
code or user bits are set or when camera menus are being
manipulated, thumbnails cannot be manipulated.
Display Mode
Indicates the thumbnail types displayed on the screen.
ALL:
Display all clips.
SELECT:
Display randomly selected clips.
MARKER:
Display clips with shot marks.
VOICE MEMO:
Display clips with voice memo data.
SLOT n:
Display clips in the specified P2 card.
(n: 1 to 5, which indicates Slots 1-5.)
Please refer to [6-5 Switching the Thumbnail Display] for
more information.
Slot Number
Indicates the P2 card in which the clip under the pointer
is recorded. The slot number of the P2 card that
contains the clip is displayed in yellow.
If the clip is recorded across multiple P2 cards, all the
slot numbers of the P2 cards that contain the clip are
displayed.
The slot numbers of the other P2 cards, if inserted, are
displayed in white.
Clip Number
The numbers set by the camera for all the clips
recognised correctly by the P2 card. These numbers are
allocated in chronological order, by shooting dates and
times.
If clips cannot be played because of different recording
formats, they are displayed in red.
Thumbnail
The image captured immediately after you start
shooting is displayed as a thumbnail.
Time Display
You can set this to display the time code at the start of
clip recording, the user bits at the start of clip recording,
the shooting time, the shooting date or the shooting and
date. Please refer to [6-16 Setting the Thumbnail
Display Mode] for more information.
The factory setting is the time code at the start of clip
recording.
Menu Bar
The Menu Bar includes menus for manipulating clips
and switching/setting the thumbnail display.
Press the MENU BAR button on the thumbnail screen to
manipulate the menu bar. Use the cursor (
) and
SET buttons to select the menu.
THUMBNAIL:
To switch the thumbnail display and set the display
mode.
OPERATION:
To delete clips and format a P2 card.
PROPERTY:
To display clip properties and P2 card status.
EXIT:
To return the pointer to the thumbnail.
Incomplete Clip Indicator
Indicates that although a clip is recorded across multiple
P2 cards, one of these cards is not inserted into a P2
card slot.
Voice Memo Indicator
This marker is displayed for a clip with a voice memo
attached. Please refer to [6-7 Voice Memo] for more
information about voice memos.
Wide Clip Indicator
This marker is displayed for clips recorded with the 16:9
aspect ratio.
Shot Mark Indicator
This marker is displayed for a clip with a shot mark
attached. Please refer to [6-6 Shot Mark] for more
information about shot marks.
Defective Clip Indicator
This marker is displayed for defective clips, which may
result from a variety of causes, e.g., powering-down
during recording.
A clip displayed with a yellow corrupt marker can be
restored. Please refer to [6-9 Restoring Clips] for more
information.
A clip displayed with a red corrupt marker cannot be
restored and must be deleted. If the clip cannot be
deleted, format the P2 card.
When clips have different formats,
is displayed
instead of
.
!7"
!12"
!13"
Thumbnail Screen
#,52%2'PINKUJDQQMࡍࠫ㧞㧜㧜㧡ᐕ㧝㧞㧤ᣣޓᧁᦐᣣޓඦᓟ㧝㧞ᤨ㧠㧥ಽ
