103
8
Chapter 8 Menu Description Tables
(continued)
8-3-3 COLOR CORRECTION
8-3-4 LOW SETTING
<Note>
The items indicated by
are the setting items for PAINT
MENU SW(
) R/W in the <SD CARD R/W SELECT>
screen. The items without
are the setting items for PAINT
MENU LEVEL R/W.
Please refer to [8-7-2 SD CARD R/W SELECT] for more
information.
The ____ in the Adjustable Range column indicates the
preset mode.
Items/
Data Saved
Adjustable
Range
Remarks
R
(SAT/PHASE)
–63
:
+00
:
+63
Perform red color correction (saturation
and hue).
S C U F E
R-Mg
(SAT/PHASE)
–63
:
+00
:
+63
Perform color correction (saturation and
hue) between red and magenta.
S C U F E
Mg
(SAT/PHASE)
–63
:
+00
:
+63
Perform magenta color correction
(saturation and hue).
S C U F E
Mg-B
(SAT/PHASE)
–63
:
+00
:
+63
Perform color correction (saturation and
hue) between magenta and blue.
S C U F E
B
(SAT/PHASE)
–63
:
+00
:
+63
Perform blue color correction
(saturation and hue).
S C U F E
B-Cy
(SAT/PHASE)
–63
:
+00
:
+63
Perform color correction (saturation and
hue) between blue and cyan.
S C U F E
Cy
(SAT/PHASE)
–63
:
+00
:
+63
Perform cyan color correction
(saturation and hue).
S C U F E
Cy-G
(SAT/PHASE)
–63
:
+00
:
+63
Perform color correction (saturation and
hue) between cyan and green.
S C U F E
G
(SAT/PHASE)
–63
:
+00
:
+63
Perform green color correction
(saturation, hue).
S C U F E
G-Yl
(SAT/PHASE)
–63
:
+00
:
+63
Perform color correction (saturation,
hue) between green and yellow.
S C U F E
Yl
(SAT/PHASE)
–63
:
+00
:
+63
Perform yellow color correction
(saturation, hue).
S C U F E
Yl-R
(SAT/PHASE)
–63
:
+00
:
+63
Perform color correction (saturation,
hue) between yellow and red.
S C U F E
COLOR
CORRECT
ON
OFF
Select whether or not to enable color
correction for the selected GAIN switch
(L/M/H).
ON:
Enable correction.
OFF:
Disable correction.
S C U F E
Items/
Data Saved
Adjustable
Range
Remarks
MASTER
GAIN
–3dB
:
0dB
:
30dB
Select the master gain from –3, 0, 3, 6,
9, 12, 15, 18, 21, 24, 27, or 30dB.
S C U F E
H.DTL LEVEL
00
:
17
:
63
Set H.DTL LEVEL.
S C U F E
V.DTL LEVEL
00
:
18
:
31
Set V.DTL LEVEL.
S C U F E
DTL CORING
00
:
02
:
15
Set DTL CORING.
S C U F E
H.DTL FREQ.
00
:
20
:
31
Set a frequency (DTL width) at which
H.DTL is added. The greater the value,
the higher the frequency (the narrower
the DTL).
S C U F E
LEVEL
DEPEND.
0
1
:
5
Set LEVEL DEPEND.
No DTL is added to the portion whose
brightness is the setting value or less.
When the GAMMA MODE SEL item is
set to STD1, each setting value
represents brightness levels, as follows:
0 = about 0%, 1 = about 4%,
2 = about 8%, 3 = about 12%,
4 = about 16%, 5 = about 20%.
S C U F E
MASTER
GAMMA
0.35
:
0.45
:
0.75
Set MASTER GAMMA in 0.01 steps.
S C U F E
BLACK
STRETCH
–3
:
OFF
:
+3
Set the gamma curb for dark spots.
S C U F E
MATRIX
TABLE
OFF
A
B
Select the color correction table.
S C U F E
COLOR
CORRECT
ON
OFF
Set the color correction to ON or OFF.
S C U F E
#,52%2'PINKUJDQQMࡍࠫ㧞㧜㧜㧡ᐕ㧝㧞㧤ᣣޓᧁᦐᣣޓඦᓟ㧝㧞ᤨ㧠㧥ಽ
