manualshive.com logo in svg

Panasonic AJ-SPC700, Руководство по эксплуатации

"Panasonic AJ-SPC700 - профессиональная видеокамера высокого качества. Ознакомьтесь с подробными инструкциями по эксплуатации в бесплатном руководстве manualshive.com. Скачайте руководство по эксплуатации сейчас, чтобы наслаждаться безупречным качеством видео и улучшить свои навыки съемки."

Поделиться
Скачать
background image

2

Caution regarding laser beams

The CCD may be damaged if it is subjected to light from a laser beam.

When using the camera-recorder in locations where laser 

irradiation equipment is used, be careful not to allow

the laser beam to shine directly on the lens.

PLEASE NOTE:

z

When preparing to record important images, always shoot some advance test footage, to verify that both pictures and
sound are being recorded normally.  

z

Should video or audio recording fail due to a malfunction of this camera-recorder or the P2 cards used, we will not assume
liability for such failure.

Software information for this product

1. Customer advisory: This product includes software licensed under the GNU General Public License (GPL) and GNU Lesser

General Public License (LGPL); customers have the right to download, modify, and redistribute source code for this soft-
ware.

Descriptions of the GPL and LGPL are stored on the installation CD included with this camera-recorder.  See the folder
named \LDOC. (The description is the original (written in English)).  To download the relevant source code, visit
http://panasonic.biz/sav/. 
Please note that we cannot answer any questions you may have about the content, etc. of any source code you may obtain
from the above Web site. 

2. This product includes software licensed under the MIT License. A description of the MIT is stored on the installation CD

included with this camera-recorder. See the folder named \LDOC. (The description is the original (written in English)).

z

Unislot is a trademark of Ikegami Tsushinki Co., Ltd.

z

Other names of companies and products are trademarks or registered trademarks of the respective companies.

#,52%2'PINKUJDQQMࡍ࡯ࠫ㧞㧜㧜㧡ᐕ㧝㧞᦬㧤ᣣޓᧁᦐᣣޓඦᓟ㧝㧞ᤨ㧠㧥ಽ

Содержание AJ-SPC700





























































































































Отзывы:

Нет отзывов

Похожие инструкции для AJ-SPC700

Panasonic NV-MX350EG Service Manual preview
NV-MX350EG
Бренд: Panasonic Страницы: 192
Sony DCR-TRV70 - Digital Handycam Camcorder Brochure preview
DCR-TRV70 - Digital Handycam Camcorder
Бренд: Sony Страницы: 2
Sony DCR-TRV50 - Digital Handycam Camcorder Brochure preview
DCR-TRV50 - Digital Handycam Camcorder
Бренд: Sony Страницы: 2
Sony DCR-TRV460 - Digital Handycam Camcorder Brochure preview
DCR-TRV460 - Digital Handycam Camcorder
Бренд: Sony Страницы: 2
Sony DCR-TRV39 - Digital Handycam Camcorder Brochure preview
DCR-TRV39 - Digital Handycam Camcorder
Бренд: Sony Страницы: 2
Sony DCR-TRV480El Service Manual preview
DCR-TRV480El
Бренд: Sony Страницы: 14
Sony DCR-TRV280 Marketing s Specifications preview
DCR-TRV280 Marketing s
Бренд: Sony Страницы: 2
Sony DCR-TRV260 - Digital Handycam Camcorder Specifications preview
DCR-TRV260 - Digital Handycam Camcorder
Бренд: Sony Страницы: 2
Sony DCR-TRV260 - Digital Handycam Camcorder Application Manual preview
DCR-TRV260 - Digital Handycam Camcorder
Бренд: Sony Страницы: 44
Sony DCR-TRV360 - Digital Video Camera Recorder Service Manual preview
DCR-TRV360 - Digital Video Camera Recorder
Бренд: Sony Страницы: 64
Sony DCR-TRV70 - Digital Handycam Camcorder Service Manual preview
DCR-TRV70 - Digital Handycam Camcorder
Бренд: Sony Страницы: 101
Sony DCR-TRV260 - Digital Handycam Camcorder Service Manual preview
DCR-TRV260 - Digital Handycam Camcorder
Бренд: Sony Страницы: 78
Sony DCR-TRV7 (English and Spanish) Operating Instructions Manual preview
DCR-TRV7 (English and Spanish)
Бренд: Sony Страницы: 120
Sony Digital8 DCR-TRV410 Service Manual preview
Digital8 DCR-TRV410
Бренд: Sony Страницы: 204
Sony DCR-TRV460 - Digital Handycam Camcorder Operation Manual preview
DCR-TRV460 - Digital Handycam Camcorder
Бренд: Sony Страницы: 136
Sony DCR-TRV720 Operating Instructions Manual preview
DCR-TRV720
Бренд: Sony Страницы: 156
Sony DCR-TRV50 - Digital Handycam Camcorder Operating Instructions Manual preview
DCR-TRV50 - Digital Handycam Camcorder
Бренд: Sony Страницы: 164
Sony DCR-TRV40 Service Manual preview
DCR-TRV40
Бренд: Sony Страницы: 165

Бренды по названию

Популярные бренды

Загрузить еще бренды