Panasonic AJ-PX270EJ, Руководство по эксплуатации, Страница: 134 / 190

– 134 –
Chapter 6 Menu Operations — Menu list
Item Description of settings
[DHCP] Sets whether to use automatic acquisition via DHCP when [INFRA] is selected in [TYPE].
[ENABLE]: Uses automatic acquisition.
[DISABLE]: Does not use automatic acquisition. Set [IP ADDRESS], [SUBNET MASK], [DEFAULT
GATEWAY], [PRIMARY DNS], and [SECONDARY DNS].
f
Factory setting: [ENABLE]
[IP ADDRESS] Sets the IP address when [DISABLE] is selected in [DHCP].
f
Factory setting: [192.168.0.1]
[SUBNET MASK] Sets the subnet mask when [DISABLE] is selected in [DHCP].
f
Factory setting: [255.255.255.0]
[DEFAULT GATEWAY] Sets the default gateway when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP].
f
Factory setting: [192.168.0.254]
[PRIMARY DNS] Sets the primary DNS server when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP], or
when [ENABLE] is selected in [DHCP] and the primary DNS server cannot be obtained.
f
Factory setting: [0.0.0.0]
[SECONDARY DNS] Sets the secondary DNS server when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP],
or when [ENABLE] is selected in [DHCP] and the primary DNS server cannot be obtained.
f
Factory setting: [0.0.0.0]
[DHCP SERVER] Sets whether to use the DHCP SERVER function when [DIRECT] is selected in [TYPE] and the camera is
connected via wireless LAN.
[ENABLE]: Uses the DHCP SERVER function.
[DISABLE]: Does not use the DHCP SERVER function.
f
Factory setting: [ENABLE]
[NETWORK TOOL] [LOG DISPLAY] Displays the connection log.
[STATUS DISPLAY] Displays the network status.
[INITIALIZE] Restores the network setting status to the factory settings.
[PING] Checks network connection using PING commands.
[DISPLAY SETUP]
Configure the settings regarding the details to be displayed on the viewfinder or LCD monitor.
These menu items cannot be set when the thumbnail screen is displayed.
Item Description of settings
[MENU DISPLAY] Selects the LCD monitor or the view finder as the location where the menu is displayed.
[LCD&EVF]: Displays the menu both on the LCD monitor and the viewfinder.
[LCD]: Displays the menu only on the LCD monitor.
f
Factory setting: [LCD&EVF]
[ZEBRA1 DETECT] Sets the extraction level of zebra pattern 1.
[0%]…[109%]
f
Factory setting: [70%]
[ZEBRA2 DETECT] Sets the extraction level of zebra pattern 2.
[0%]…[109%]
f
Factory setting: [85%]
[ZEBRA2] Sets on/off of zebra pattern 2 and selects the type.
[ON], [SPOT], [OFF]
f
Factory setting: [SPOT]
[CENTER MARK] Controls the center mark.
[1]: + (large)
[2]: Open center (large)
[3]: + (small)
[4]: Open center (small)
[OFF]: Does not display.
f
Factory setting: [1]
[SAFETY MARK] Selects the type of frame for the safety zone marker.
[1]: Box
[2]: Corners
[OFF]: Does not display.
f
Factory setting: [2]
[SAFETY AREA] Sets the size of the safety zone marker.
The constant ratio of length to width can be set in 1% increments.
[80%]…[100%]
f
Factory setting: [90%]
[FRAME MARK] Enables/disables frame marker.
[ON], [OFF]
f
Factory setting: [OFF]
[FRAME SIG] Sets frame marker aspect ratio.
[4:3], [13:9], [14:9], [1.85:1], [2.35:1]
f
Factory setting: [4:3]
[FRAME LVL] Sets the level of the outside of the frame marker.
[0]…[15]
f
Factory setting: [15]
[LEVEL GAUGE] Enables/disables level gauge.
[ON], [OFF]
f
Factory setting: [OFF]